Monday, October 18, 2010

Witchy Woman


Witchy Woman
This tutorial was written by Jenny on 10/18/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Heather Valentin. You need a license to use her artwork. I am licensed through MyTagArt.
You can now purchase her tubes at Creative Design Outlet.

Supplies Needed:
1-2 tubes of choice
Scrapkit of choice (I'm using Spookylicious FTU by Toxic Desirez)
TagTemplate78_Rose HERE
WSL_Mask260 by Weescotslass
Font of choice (I'm using bountiful font)

Open template, hide credits, shift d to duplicate, close original.

New raster layer, select with magic wand, copy & paste Paper5 into selection, select none, apply mask.

On Top Right Purple Circle and Bottom Left Purple Circle you will need to apply the same step-
Selections, select all, float, defloat, copy & paste Paper1 as a new layer, resize 50%, selections,invert,delete,select none,hide originals.

Select Orange Fritillary layer, recolor to match your supplies.

Select Green Rectangle Box, selections, select all, float, defloat, copy & paste paper6 as a new layer, resize 85%, selections, invert, delete, select none.

Select Black Circle, selections, select all,float, defloat, new raster layer, flood fill with color of choice, select none, hide original.

Select Orange Circle layer, selections, select all, float, defloat, copy & paste Paper3 as a new layer, resize 65%, selections, invert, delete, select none, hide original.

Hide Pixel Wordart.

Copy & Paste web as a new layer, resize to your liking.

Recolor Orange rectangle using another color of choice.

Select black rectangle, selections, select all, float, defloat, new raster layer, flood fill with another color of choice, copy & paste tube of choice as a new layer, resize if needed, selections, invert,delete, select none, hide original layer, duplicate tube, adjust, blur, gaussian blur 3, right click, properties, overlay.

Select bats, selections, select all, float, defloat, new raster layer, flood fill with color of choice, select none, hide original.

Hide star lines.

Select Right Circle Line, selections, select all, float, defloat, new raster layer, flood fill with color of choice, select none, apply noise, add drop shadow, hide original.
Repeat on Left Circle Line changing the color.

Move the bats above the circle line layers.

Copy & Paste star of choice as a new layer, resize to your liking, place upward and to the right, add drop shadow.

Copy & Paste main tube as a new layer, resize if needed, see my tag for placement, add drop shadow.

Copy & Paste cauldron as a new layer, resize to your liking, place behind main tube, below bat layer, add drop shadow, see my tag.

Copy & Paste broom as a new layer, resize to your liking, free rotate 90 degrees right or left, add drop shadow, see my tag.

Recolor glitter wordart, make sure both it and the white wordart are above the broom layer.

Crop or resize the tag to your liking.

Add copyright info and text and you're ready to save.

Thank you for trying my tut. Please leave some love in the CBox.





I'll Put A Spell On You


I'll Put A Spell On You
This tutorial was written by Jenny on 10/18/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Melia Newman. You need a license to use her artwork. I am licensed through MyTagArt.
You can now purchase her tubes at Creative Design Outlet.

Supplies Needed:
1 tube and 3 images of choice
Scrapkit of choice (I'm using Trick or Treat FTU Scrapkit by ZiggyFan Scrap Designs)
WSL_Mask84 by Weescotslass
Font used-Bat Font

Open new canvas 600 x 600 flood fill white.

New raster layer, select with magic wand, copy & paste Paper5 into selection, select none, apply mask.

Copy & Paste frame of choice as a new layer, resize 50% then again 85%.

Copy & Paste each image as a new layer, move below frame, resize each to your liking, use the selection tool to remove any excess, add drop shadow to frame, merge frame and images together, move toward the bottom just a bit and resize again if needed.

Copy & Paste tube as a new layer, move below framed images, resize if needed, add drop shadow, see my tag for placement.

Copy & Paste spider web as a new layer, resize to your liking place opposite of the tube and below the tube, add drop shadow.

Copy & Paste each of the 3 suckers as a new layer, free rotate them all 90 degrees left.
Resize the first one to 75%
Resize the second one to 65%
Resize the third one to 55%
Add drop shadow to each, see my tag for placement, merge those 3 layers together, duplicate,image, mirror.

Copy & Paste each the pumpkin and spider as a new layer, resize to your liking and place in front of the suckers at the bottom, add drop shadow to each.

Copy & Paste candies and candy corn as a new layer, resize and place to your liking.

Crop the canvas.

Add copyright info and text and you're now ready to save.

Thanks for trying my tut. Please leave some love in the CBox.



The Glory of Autumn


The Glory of Autumn
This tutorial was written by Jenny on 10/18/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Teri Rosario. You need a license to use her artwork. I am licensed through MyTagArt.
You can now purchase her tubes at Creative Design Outlet.

Supplies Needed:
1 tube and image of choice
Scrapkit of choice (I'm using Autumn's Glory FTU by Becky's Creations)
Template #47 by LaCaRoLiTa'S DeSiGnZ
WSL_Mask222 by Weescotslass
Font of choice (I'm using SassyFrass ROB)

Open template, hide credits,shift d to duplicate, close original.

New raster layer, flood fill white.

New raster layer, flood fill with a matching color of choice, apply mask.

Select "background" resize 75%, selections, select all, float, defloat, copy & paste paper2 as a new layer, resize around 125%, selections, invert, delete, select none, sharpen, hide original.

Select Raster1, selections,select all, float,defloat, copy & paste paper12 as a new layer, selections, invert, delete, select none, add drop shadow of choice, hide original.

Select Raster2, selections,select all,float,defloat, new raster layer, flood fill with color of choice, select none, apply noise, add drop shadow, hide original.

Select Raster3, selections,select all, float,defloat, copy & paste paper5 as a new layer, selections, invert,delete,select none, add drop shadow, hide original.

Select Raster4, selections, select all, float, defloat, copy & paste paper1 as a new layer, selections, invert, delete, select none, hide original.

Copy & Paste image of choice, free rotate 15 degrees left, select the new Raster4 layer, selections, select all, float, defloat, selections,invert, click delete on the image layer, select none, drop opacity of image down to around 60%.

Select Raster5, selections, select all, float, defloat, new raster layer, flood fill with color of choice, select none, add drop shadow, hide original.

Copy & Paste tube as a new layer, resize if needed, mirror, add drop shadow, place to your liking.

Copy & Paste pendant, flowers and leaves all as a new layer each, resize as needed and place to your liking.

Crop the canvas down and resize if needed.

Add copyright info and text and you're ready to save.

Thanks for trying my tut. I'd love to see your results.





Sunday, October 17, 2010

Wickedly Poisonous


Wickedly Poisonous
This tutorial was written by Jenny on 10/17/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Chrissy Clark. You need a license to use her artwork. I am licensed through MyTagArt.
You can now purchase her tubes at Creative Design Outlet.

Supplies Needed:
1 tube of choice
Scrapkit of choice (I'm using The Witching Hour FTU by Created by Jill)
TagTemplate84_Rose HERE
WSL_Mask330 by Weescotslass
Font of choice (I'm using Mitch Hand)

Open tag template, hide credits, shift d to duplicate, close original.

Select Raster11, new raster layer, select with magic wand, copy & paste Paper2 into selection, select none, apply mask, duplicate.

Select Raster8, selections, select all, float, defloat, copy & paste Paper2 as a new layer, selections, invert, delete, select none, hide original.

Select Raster10, selections, float,defloat, copy & paste Paper3 as a new layer, resize 65%, selections, invert, delete, select none, duplicate, mirror, flip, hide both originals.

Select Raster9, selections, float, defloat, I copied and pasted a paper from the tube as a new layer but any paper will work, selections, invert, delete, duplicate, mirror, hide original.

Select Raster5, selections, float, defloat, new raster layer, flood fill with color of choice, select none, add noise, duplicate, image, mirror,flip, hide both originals.

Select Raster3, selections, select all, float, defloat, copy & paste Paper4 as a new layer, selections, invert, delete, select none, hide original.

Select Raster7, selections, select all, float, defloat, again I copied and pasted another paper from the tube as a new layer but any paper will work, selections, invert, delete, select none, hide original.

Select Raster2, selections, select all, float, defloat, copy & paste Paper1 as a new layer, resize 85%, selections,invert,delete, select none, hide original.

Hide Raster 4

Select Copy of Raster 4, selections, select all, float, defloat, new raster layer, flood fill with matching color, select none, hide original.

On the new text layer, selections, select all, float, defloat, selections, modify, expand2, flood fill with black, move below, select none, add drop shadow.

Copy & Paste tube as a new layer, resize and place to your liking, add drop shadow.

Adorn the tag with any other supplies you'd like to add (pumpkin, grass, flower,ect) place to your liking.

Crop or resize the tag.

Add copyright info and text and you're now ready to save.

Thank you for trying out my tutorial. I hope you enjoyed it. Please leave some love in my cbox.


Saturday, October 16, 2010

Pink Says It All


Pink Says It All
This tutorial was written by Jenny on 10/16/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Shirley Incoente. You need a license to use her artwork. I have a license through MyTagArt.
Please check her site for new licensing information.

Supplies Needed:
1 tube of choice

4 Photos of choice
(I'm using Photos ©Emily Schroeder. You need a license from MyTagArt to use her photos)

Scrapkit of choice (I'm using So Into Pink by Created by Jill)
missy_tagtemplate374 by Divine Intentionz
WSL_Mask302 by Weescotslass
Font of choice (I'm using Not His Angel)


Open template,hide credits and wordart, shift d to duplicate, close original.

Recolor circle1,filmstrip,square1, square2,star1 and star2 all to match your supplies.

Unhide background layer, new raster layer, select with magic wand, copy & paste Paper01 into selection, select none, apply mask, duplicate.

Select rectangle1, selections, select all, float,defloat, new raster layer, flood fill with color of choice, select none, hide original.

Repeat on rectangle3.

Select rectangel2, selections, select all, float, defloat, copy & paste Paper12 as a new layer, resize 50%, selections, invert, delete, select none, hide original.

Repeat on rectangel4.

Select circle2, selection, select all, float, defloat, copy & paste Paper10 as a new layer, resize 80%, selections, invert, delete, select none, hide original.

Repeat on circle3 using Paper14.

Repeat on circle4 using Paper11.

Hide transmission circle.

Recolor circle5 and circle6 to match.

Copy & Paste flower1 as a new layer, resize 65%, add drop shadow, place below circle 5 and 6 but upwards, see my tag.

Copy & Paste rose3 as a new layer, resize 65%, add drop shadow, move above circle 5 and 6, see my tag.

Copy & Paste glitter1 as a new layer, resize 65%.

Copy & Paste candle as a new layer, resize to your liking, see my tag for placement.

Select filmstrip back, copy & paste a new image for each square, resize as needed, place to your liking, use the selection tool to select around each, selections, invert, delete, select none.

Select filmstrip layer.

Copy & Paste tube as a new layer, resize to your liking, place accordingly, add drop shadow.

Copy & Paste pink gem as a new layer, resize 50%, place in one corner of the filmstrip, duplicate, image, flip, mirror.

Copy & Paste beads as a new layer, resize to your liking, move to the bottom above the mask layer, see my tag.

Back to the tube layer.

Copy & Paste rose1 as a new layer, place toward the bottom right, resize 65%, add drop shadow.

Copy & Paste glitterheart as a new layer, resize if needed, place ontop of the rose1 layer.

Open framewrap2, image, free rotate 90 degrees left, copy & paste as a new layer on your canvas, resize to your liking, place below rose1 but above tube layer, add drop shadow, you may need to flip also.

Copy & Paste pearls as a new layer, resize to your liking, see my tag for placement.

Resize canvas or crop if you'd like.k

Add copyright info and text and you're ready to save.

Thank you for trying my tut. I'd love to see your results. Please leave some love in my CBox.






Friday, October 15, 2010

Spooktacular


Spooktacular
This tutorial was written by Jenny on 10/15/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Sue Miller. You need a license to use her artwork. I have a license through MyTagArt.
You can now find her tubes at UpYourArt.

Supplies Needed:
5 tubes of choice from the same artist
Scrapkit of choice (I'm using Falling for Elias FTU by Gothic Inspirations)
AS_Halloween Temp2 HERE
WSL_Mask302 by Weescotslass
Font of choice (I'm using Billy Argel Font)


Open template, hide credits, bat and cat then shift d to duplicate and close original.

Unhide background layer, flood fill the sides with white.

New raster layer, flood fill with color of choice, apply mask,duplicate,mirror.

Copy & Paste splatter as a new layer, resize 75%, adjust, sharpen, place upward and to the right.

Copy & Paste WirePumpkin as a new layer, resize 85%, move over to the right just a bit.

Select Raster 12 , selections, select all, float, defloat, new raster layer and flood fill with color of choice, select none, hide original.

Raster13 layer add noise.

Select Raster9, selections, select all, float, defloat, copy & paste Paper4 as a new layer, resize 75%, selections, invert,delete,select none, hide original.

Repeat on Raster6 using Paper5 and resize to 50% instead.

Repeat again on Copy of Raster10 using Paper3.

Repeat on Raster10 using Paper1.

Once more on Raster5 using Paper2.

Copy & Paste flower1 as a new layer, place upon new Raster5 layer, resize 50%, add drop shadow.

Recolor Raster3 to match your tube.

Copy & Paste spider web as a new layer, resize to your liking, place to the right, see my tag.

Copy & Paste main tube as a new layer, resize if needed, add drop shadow, see my tag for placement.

Select Raster7, selections,select all, float, defloat, copy & paste Paper4 as a new layer, resize 75%, selections, invert,delete, select none, hide original.

Copy & Paste each tube or image as a new layer, place below the filmstrip, resize if needed, use the selection tool to select around each, selections, invert, delete on each layer, select none.

Recolor Raster8 to match your supplies.

Copy & Paste broom as a new layer, resize to your liking, free rotate 90 degrees right, place atop the filmstrip layer, add drop shadow.

Recolor Raster11 (wordart) to match.

Add noise to Raster15 (spider)

Copy & Paste staple as a new layer, resize to your liking, place on flower, see my tag.

Crop your tag, resize if needed.

Add copyright info

Add text and now you're ready to save.

Thank you for trying my tutorial. Hope you'll take time to leave some love in my CBox.