Tuesday, August 17, 2010

Time Is Up


Time is Up
This tutorial was written by Jenny on 8/17/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Gina Canady Adler. You need a license to use her artwork. I have a license through MyTagArt.
Please check her site for new licensing information.
Supplies Needed:
1 tube of choice
Scrapkit of choice (I'm using Edward FTU by Addictive Pleasures)
WSL_Mask260 by Weescotslass
Font of choice (I'm using Pablo)

Open new canvas 600 x 600 and flood fill white.

New raster layer, select with magic wand, copy & paste p4 into selection, select none, apply mask.

Copy & Paste frame5 as a new layer, resize 80%, free rotate 90 degrees right or left, add drop shadow.

Copy & Paste p6 as a new layer, resize 80%, move below frame, copy & paste moon as a new layer, move below frame upward right, resize to your liking, use selection tool to draw around frame, selections, invert, delete on paper and moon layer, select none.

Copy & Paste oldpaper as a new layer, move below frame and paper, resize 75%.

Copy & Paste glitter as a new layer, above mask layer, upward right corner, duplicate, flip, mirror.

Select frame.

Copy & Paste lantern as a new layer, resize to your liking, see my tag for placement.

Copy & Paste roses as a new layer, resize 85%, place on the frame to the right.

Copy & Paste vine as a new layer, resize 85%, place below roses.

Duplicate each and mirror.

Copy & Paste ivy3 as a new layer, place below roses and vine on the left side.

Copy & Paste leaves as a new layer, mix inbetween the layers on the left.

Copy & Paste flower as a new layer, resize approx 50%, place toward the bottom left, duplicate and move over to the right just a bit.

Copy & Paste clock as a new layer, place on top of the flowers, resize to your liking.

Duplicate the flower layer, move to the top of the frame as I did, resize 65%, duplicate 2 more times and arrange to your liking.

Copy & Paste bench as a new layer, resize to your liking, place to the right, add drop shadow.

Copy & Paste tube as a new layer, resize to your liking, place on bench, add drop shadow.

Resize canvas if you'd like.

Add copyright info and text and you're ready to save.

I hope you enjoyed my tutorial. Please leave some love in my C-Box!



Monday, August 16, 2010

Ocean Delight


Ocean Delight
This tutorial was written by Jenny on 8/16/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Ann Howard. You need a license to use her artwork. I have a license through MyTagArt.
Please check her site for new licensing information.

Supplies Needed:
1 tube of choice
Scrapkit of choice (I'm using PoseidonsRealm PTU by KatNKDA)
template2takeahint by SyllyCreationz HERE
WSL_Mask302 by Weescotslass
Font of choice (I'm using Miserably Lose)

Open template, hide all word art and credit, shift d to duplicate, close original.

Select background layer, new raster layer, select with magic wand, copy & paste paper of choice into selection, select none, apply mask, duplicate.

Select small circles layer, selections, select all, float, defloat, new raster layer, flood fill using 2 different matching colors, select none, apply noise, hide original.

On Small Pink Circle 1 & 2 merge those 2 together, selections, select all, float, defloat, copy & paste paper of choice as a new layer, resize if needed, selections, invert, delete, select none, hide original.

Repeat on Small White Circle 1 & 2 using a different paper and recolor to match tube.

Select black oval, selections, float, defloat, copy & paste another paper of choice as a new layer, resize if needed, selections,invert,delete,select none, apply noise, hide original.

Repeat on Pink oval layer using a different paper and no noise.

Select black rectangle, selections, float, defloat, copy & paste the same paper you used for the mask as a new layer, selections, invert,delete, selection none, recolor to match your tube, hide original.

Select black circle, selections, float, defloat, copy & paste same paper used on black oval as a new layer, resize if needed, selections,invert,delete,select none, apply noise, hide original.

Select Pink Circle, selections, float, defloat, copy & paste paper of choice as a new layer,resize if needed, selections, invert, delete, select none, hide original.

Repeat on black dotted circle, pink circle and small white circle using a different paper each time.


Select black rectangle, repeat same step again using the same paper used for mask, recolor to match tube.

Now it's just a matter of adding the embellishments you'd like and placing them accordingly (bow, fish or seahorse, jellyfish, jewls,ect ect)

Add drop shadow to each of those layers.

Copy & paste tube as a new layer, resize if needed, add drop shadow, see my tag for placement.

Merge visible, resize canvas, sharpen if needed.

Add copyright info and text and you're now ready to save.



Sunday, August 15, 2010

Evil Wishes


Evil Wishes
This tutorial was written by Jenny on 8/15/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork and photography of Gaynor Lewis. You need a license to use her art/photography. I am licensed to both through MyTagArt. Please check her site above for future licensing info.

Supplies Needed:
1 tube of choice
1 photo of choice
Scrapkit of choice (I'm using PTU Dark Side of Love by Shal's World at MyTagArt)
KH_CMJuly19-Aug1_Template2 by Kathy HERE
WSL_Mask302 by Weescotslass
Font of choice (I'm using Satisfaction)

Open template, hide credits and superstar wordart, shift d to duplicate, close original.

Recolor the stars to match your supplies.

New raster layer, flood fill white, move to the bottom.
New raster layer, select with magic wand, flood fill with color of choice, select none, apply mask.

Recolor Glitter Oval Frame to match.

Select Oval, selections, select all, float, defloat, copy & paste paper14 as a new layer, selections,invert,delete, select none, hide original.

Copy & Paste tube of choice as a new layer, resize if needed, add drop shadow, see my tag for placement.

Select mask layer, copy & paste splat 1 as a new layer place upward and to the right, duplicate, flip, mirror.

Copy & Paste trees as a new layer, resize and place above new oval layer, arrange to your liking.

Copy & Paste photo as a new layer, select inside first of filmstrip squares, selections,modify, expand2, selections,invert, delete on photo layer, select none. Repeat this on each square changing the view of the photo each time by moving it upward or downward.

Copy & Paste label of choice as a new layer, resize to your liking and place at the top of the filmstrip.

Below tube layer, copy & paste candles and flower of choice as a new layer, resize to your liking, add drop shadow, duplicate each and mirror.

Add bow of choice to the frame.

Resize to your liking.

Add copyright info and text and you're ready to save.



Blown Away


Blown Away
This tutorial was written by Jenny on 8/15/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Charlotte Thomson Art & Illustration. You need a license to use her artwork. I have a license through MyTagArt.
Please check her site for new licensing information.

Supplies Needed:
1 tube of choice
Scrapkit of choice (I'm using PTU V is for Vanity by Scrappin Krazy Designs at MyTagArt)
LMC-Template-ByDaira-CMChallenge-08 HERE
WSL_Mask302 by Weescotslass
Font of choice (I'm using Hula Skirt Girl)

Open template, hide credits and wordart, shift d to duplicate, close original.

On background layer, new raster layer, select with magic wand, copy & paste paper14 into selection, select none, apply mask.

On each circle 1-4
Selections, select all, float, defloat, copy & paste a paper of choice each time, selections, invert, delete on each, select none, hide each original layer.
repeat on frame1 and frame2, rectangle and rec frame using a different paper each time.
again on star.

Select small star, create a gradient from the colors in your supplies, selections, select all, float, defloat, new raster layer, flood fill with gradient, select none, hide original, add noise.

Copy & Paste wireshape as a new layer, resize if needed, blend between the circles.

Copy & Paste rings3 as a new layer, resize if needed, see my tag fro placement.

Add paint splatters and place to your liking.

Copy & Paste tube as a new layer, move to the top, resize if needed, add drop shadow.

Add sparkles and bows and place to your liking.

Copy & Paste screw as a new layer, resize to your liking, duplicte 2x's and arrange them all on the frame.

Add copyright info and text and you're ready to save.

When Seasons Collide


When Seasons Collide
This tutorial was written by Jenny on 8/15/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Elisa Tudor. You need a license to use her artwork. I have a license through MyTagArt.
Please check her site for new licensing information.

Supplies Needed:
1 Tube of choice
1 photo of choice (I'm using a FTU photo ©Jo Jackson from MyTagArt - Please check her site above for more licensing info.)
Scrapkit of choice (I'm using April Showers FTU Scrapkit by Artmama's Studio)
missy_tagtemplate365 by Divine Intentionz
Mask of choice
Font of choice (I'm using Genoveva)

Open template, hide credits, wordart and splat, shift d to duplicate and close original.

Select background layer, new raster layer, select with magic wand, copy & paste Paper01 into selection, select none, apply mask.

Select circle1, selections, select all, float, defloat, copy & paste Paper10 as a new layer, resize 75%, selections,invert,delete,select none,hide original.

Select circle2, selections, select all, float, defloat, copy & paste Paper11 as a new layer, resize 65%, selections,invert,delete,select none, hide original.

Select square1, selections, select all, float, defloat, copy & paste Paper07 as a new layer, selections, invert, delete, select none, hide original.

Select square2, selections, select all, float, defloat, copy & paste Paper09 as a new layer, resize 75%, selections, invert, delete, select none, hide original.

Select frame back, selections, select all, float, defloat, copy & paste photo of choice as a new layer, resize if needed, selections, invert, delete, select none, hide original.

Add drop shadow to frame.

Copy & Paste vine as a new layer, add drop shadow, place toward the left.

Copy & Paste button of choice, resize, add drop shadow, place on the frame.

Copy & Paste flowers as a new layer, resize and place to your liking.

Copy & Paste tube as a new layer, resize if needed, add drop shadow, see my tag for placement.

Copy & Paste mushroom and flowers as a new layer, resize and place to your liking.

Hide mask layer and background, merge visible, resize approx 85%.

Unhide and merge visible.

Add copyright info and text and you're ready to save.



Lost in the Green


Lost in the Green
This tutorial was written by Jenny on 8/15/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Karen Sweetland. You need a license to use her artwork. I am licensed to this image through MyTagArt. Please check her site above for more licensing info.

Supplies Needed:
1 Tube of choice
Scrapkit of choice
(I'm using A Hint of Mint PTU Scrapkit by Chili Designz from MyTagArt)
Mask of choice
Font of choice (I'm using Sloop-ScriptTwo)

This is a quick but cute tut. I hope you enjoy it.

Open new canvas 600 x 500 flood fill white.

New raster layer, select with magic wand, copy & paste paper of choice into selection, select none, apply mask, duplicate.

Copy & Paste frame as a new layer, resize to your liking, add drop shadow, select inside frame, selections, modify, expand 2, copy & paste paper of choice as a new layer, selections, invert, delete, select none, move paper below frame.

Copy & Paste doodle as a new layer, resize if needed, add drop shadow, place to your liking, below frame and paper layer.

Add any other embellishments such as flowers, buttons, ect and place to your liking.

Copy & Paste tube as a new layer, resize if needed, add drop shadow, place to your liking.

Resize canvas if you'd like.

Add copyright info and text and you're ready to save.