Sunday, July 11, 2010

Fairy Punk'd


Fairy Punk'd
This tutorial was written by Jenny on 7/11/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Hannah Lynn. You need a license to use her artwork. I am licensed through MyTagArt.
You can now purchase her tubes at Creative Design Outlet.

Supplies Needed:
6 tubes of choice
Scrapkit of choice or the one I'm using:
Neon Punk Collab by Toxic Desirez and Addictive Pleasures
WSL_Mask302 by Weescotslass
Font of choice (I'm using Feuerfeste Normal)

Open new canvas 600 x 600 and flood fill white.

New raster layer, select with magic wand, copy & paste Paper 13 into selection, select none, apply mask.

Copy & Paste Flame 2 as a new layer, resize 70, free rotate left 25 degrees, add a drop shadow, place toward the left of the canvas.

Copy & Paste Splatter as a new layer, place toward the right bottom, duplicate, mirror, flip.

Copy & Paste beads as a new layer, resize 85%.

Copy & Paste Sticker as a new layer, resize 50%, add subtle drop shadow, place upper right corner.

Copy & Paste Frame as a new layer, resize 75%, add drop shadow, see my tag for placement.

Copy & Paste paper of choice as a new layer, move below frame, using magic wand select inside each area of the frame, selections, modify 5, selections, invert, delete, select none.

Copy & Paste tube as a new layer, resize if needed, add drop shadow, place below frame.

Merge frame, tube and paper visible only, duplicate, on original, adjust, blur, gaussion blur 10.

Copy & Paste Star2 as a new layer, resize 65%, place toward the left bottom of frame.

Copy & Paste feathers as a new layer, placing toward the bottom of the canvas, resize if needed, see my tag.

Copy & Paste flower 3 as a new layer, resize to your liking, place at the top left corner of the frame, add drop shadow.

Copy & Paste tube of choice as a new layer, resize if needed, add drop shadow,this tube will be sitting above and beside the frames over to the left, see my tag.

Copy & Paste Star1 as a new layer, resize 65%, place at the bottom left of the previous tube.

Copy & Paste Flame 1 as a new layer, resize 65%, place to the right, see my tag.

Copy & Paste Flower4 as a new layer, resize to your liking, place to the left, see my tag.

Copy & Paste filmstrip as a new layer, resize 70%, place down toward the bottom above feathers.

Copy & Paste paper of choice as a new layer, resize 70%, click inside each of the filmstrip squares, selections, modify, expand 1, selections, invert, delete on paper layer, select none, apply drop shadow to frame.

Now one by one copy and paste each tube as a new layer placing them to your liking inside the squares. You may need to resize these drastically. Use the eraser tool to remove any excess. Once you have filled them all then merge the filmstrip, 4 tube layers and paper visible, duplicate, on the original, adjust, blur, guassian blur 10.

Copy & Paste Hearts on String as a new layer, resize 70%, place at the bottom of the filmstrip, add drop shadow.

Copy & Paste beaded string 1 as a new layer, resize to your liking, see my tag for placement.

Copy & Paste Ribbon as a new layer, resize to your liking, add drop shadow, mirror, see my tag for placement.

Resize canvas if you'd like.

Add copyright info and text and you're now ready to save.

I hope you enjoyed my tutorial. Please leave some love in my C-Box!


Fashion Passion


Fashion Passion
This tutorial was written by Jenny on 7/11/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Lisa Montuori. You need a license to use her artwork. I have a license through MyTagArt.
Please check her site for new licensing information.

Supplies Needed:
1 tube of choice
Template 102 by Rachel at Scraps of Enchantment
Scrapkit of choice- I am using Carnival PTU Scrapkit by Kat NKDA
WSL_Mask355 by Weescotslass
Font of choice (I'm using SP Purkage)

*For the purpose of writing this tut-I'm assuming you are using the same kit of me. However, please feel free to use any kit you'd like. You can use my tag/tut as a guide in creating your tag.

Open template, hide credits and dots, shift d to duplicate, close original.

Move frame layer above background layer.

Select background layer, selections, float, defloat, copy & paste paper17 as a new layer, selections, invert, delete, select none, hide original.

New raster layer, move to the bottom, flood fill white, new raster layer, select with magic wand, copy & paste paper05 into selection, select none, apply mask.

Copy & Paste element04 (glitter circle) as a new layer, place to the left, resize 60%.

Copy & Paste element37 as a new layer, resize to your liking, add a subtle drop shadow, place on top of element04 layer.

Copy & Paste element78 as a new layer, resize 60%, place to the right of the canvas.


Copy & Paste element70 (sparkles) as a new layer, resize to 60%, place on the new background layer.

Copy & Paste element25 as a new layer, resize to your liking, place to the right, keeping under the frame with just a little sticking out, add drop shadow. See my tag.

Copy & Paste element30 (beads) as a new layer, resize to your liking, place on the new background layer toward the bottom.

Copy & Paste tube as a new layer, resize to your liking, place to the left under frame, select the portion you would like to have sticking out from the frame, right click, properties, promote selection to layer, move to top. Go back to original tube, remove any excess sticking out from the bottom and add drop shadow.

Copy & Paste rose of choice as a new layer, resize to your liking, add drop shadow, place under frame in the right corner. I allowed mine to remain sticking out from the frame but you may choose to remove that part.

Select stars, selection, select all, float, defloat, copy & paste paper of choice as a new layer, selections, invert, delete, select none, hide original.

Recolor the letters of the text to match, add a gradient glow if you wish.

Copy & Paste element73 (carnival mask) as a new layer, resize to your liking, free rotate 25 degrees left, add drop shadow, place on the bottom left corner of the frame, under the text.

Resize the canvas. Add copyright info and text and you're now ready to save.

I hope you enjoyed this tutorial. Please leave some love in my C-Box!



Sunday, July 4, 2010

Brattitude


Brattitude
This tutorial was written by Jenny on 7/4/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Bessie Ho. You need a license to use her artwork. I have a license through MyTagArt.
Please check her site for new licensing information.

Supplies Needed:
3 tubes of choice
Scrapkit of Choice
(I'm using A Hint of Purple PTU Scrapkit by Chili Designz
I'm licensed to this kit through MyTagArt)
Vix_Mask147 by Vix
Font of choice (I'm using DumbAss and Miserably Lose)
DBV Misfit template02 by Vaybs HERE

Open template, hide credits, small word art, shift d to duplicate, close original.

Unhide raster1 layer, canvas size 750 x 650, we'll resize smaller later, flood fill the rest of raster 1 with white.

New Raster layer, select with magic wand, flood fill with a color from your supplies, select none, apply mask.

Raster 9, copy of Raster 9, Raster 10, Copy of Raster 10, Raster 4, Copy of Raster 4:
On each layer repeat the following using a different color or paper each time.
Selections, select all, float, defloat, copy & paste paper as a new layer, resize if needed, selections, invert, delete, select none, hide original.

Repeat on Raster 5 and Copy of Raster 5 using 2 different papers as well.

Raster 7 and Copy of Raster 7, selections, select all, float, defloat, new raster layer, flood fill with a bright color of choice, select none, hide original. Apply noise if you'd like.

Select Raster 3, selections, select all, float, defloat, copy & paste another paper of choice as a new layer, resize if needed, copy & paste tube of choice as a new layer, resize if needed, selections, invert, delete on paper layer, delete on tube layer, select none.

Duplicate tube layer, adjust, blur, gaussian blur 3, right click,properties overlay, opacity 60.
Opacity 60 on the original tube layer.

On the circle and dotted circle layer, selections, select all, float, defloat, new raster layer for each and flood fill with a bright color that matches, select none, apply some noise if you'd like, hide original.

On the wordart layer, selections, select all, float, defloat, new raster layer, create a gradient from 2 matching colors, flood fill, select none, apply noise if you'd like, select all, float, defloat, modify, expand 3, new raster layer, flood fill with color of choice, move below wordart, select none, apply drop shadow.

Copy & Paste tube as a new layer, resize if needed, add drop shadow, place toward the right.

If adding another tube then repeat and add to the left.

Add any embellishments you'd like.

Close mask and background layer, merge visible, resize around 85%, sharpen if needed.

Crop or resize the entire canvas.

Add copyright info and text and you are now ready to save.

I hope you enjoyed my tutorial.



An Angel's Dream


An Angel's Dream
This tutorial was written by Jenny on 7/4/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Melia Newman. You need a license to use her artwork. I am licensed through MyTagArt.
You can now purchase her tubes at Creative Design Outlet.

Supplies Needed:
1 tube and image of choiceLink
Scrapkit of choice
(I'm using Vintage Nostalgia PTU Scrapkit by Jillann's Creations
I am licensed to this kit through MyTagArt.)
WSL_Mask260 by Weescotslass
Clouds of choice (I'm using some by Rainbow Coffi)
Font of choice (I'm using Vtks Beautiful Dreams)

dsb flux bright noise- optional



Open a new canvas 750 x 650 (we'll resize later)
Flood fill white.
New Raster layer, select with magic wand, copy & paste Paper24 into selection, select none, apply mask.

Copy & Paste frame1 as a new layer, free rotate 90 degrees, resize to your liking, add drop shadow.

Copy & Paste image of choice, place below frame, resize if needed, merge frame and image visible.

Copy & Paste IvyVine as a new layer, resize to approx 65%, add drop shadow, place it to the right of the frame, duplicate, mirror, place under the frame on the left side.

Copy & Paste flower branch 4 as a new layer, flip and mirror, resize to your liking, add drop shadow, duplicate,mirror,see my tag for placement.

Copy & Paste tube as a new layer, resize if needed, add drop shadow, see my tag for placement.

Now you can surround the tube with as many clouds as you'd like.

Copy & Paste dream wordart as a new layer and place upon the frame, resize to your liking, add drop shadow.

Copy & Paste flower branch 2 as a new layer, resize to your liking, place below the clouds so that it's peeping up, see my tag if needed.

Copy & Paste crotchet flower as a new layer,resize to your liking, place next to the flower branch 2 layer.

Copy & Paste stitched wings as a new layer, resize to your liking, free rotate 25 degrees left, add drop shadow, place upon the clouds.

Copy & Paste key as a new layer, resize to your liking, place on the wings as I did.

Copy & Paste ribbon of choice as a new layer, resize if needed add drop shadow and place on the top of the key.

Now back to the tube layer, I used the selection tool and selected around the wings and added some noise to them. This is optional. You could also animate it if you want.

Crop the tag down or resize it.

Add copyright info and text and you're now ready to save.

Thank you for trying my tutorial! I hope you enjoyed it.



The Real Alice


The Real Alice
This tutorial was written by Jenny on 7/4/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of C and C Brown. You need a license to use their artwork. I am licensed through MyTagArt. You can check their site for more licensing info.

Supplies Needed:
1 tube and image of choice
Scrapkit of choice (I'm using Down the Rabbit Hole by PolkaDot Scraps)
WSL_Mask260 by Weescotslass
Fonts of choice (I'm using Jellyka Gare de Chambord and Agent Orange)

Open a new canvas 600 x 600 and flood fill white.

New raster layer, select with magic wand, copy & paste paper4 into selection, select none, apply mask.

Copy & Paste frame1 as a new layer, resize 60%, add drop shadow.

Copy & Paste image of choice, resize if needed, select inside the frame with magic wand, selections, modify, expand 3, selections,invert,delete on image layer, select none, merge frame and image layer visible.

Copy & Paste element31 as a new layer, resize 65%, move below frame and over to the right, add drop shadow.

Copy & Paste element32 as a new layer, resize to your liking, add drop shadow, place below frame but above element31, over to the right a bit.

Copy & Paste element39 as a new layer, resize to your liking, place above mask layer.

Copy & Paste element30 as a new layer, resize to your liking, place below the frame layer, add drop shadow.

Copy & Paste element6 as a new layer, resize to your liking, add drop shadow, place below frame and upwards.

Copy & Paste element14 as a new layer, place on the top left of the frame, resize to your liking, add drop shadow.

Copy & Paste tube as a new layer,resize if needed, add drop shadow and place to your liking. This particular image has a rabbit layer tube too. You can use that the way that I did or use the rabbit from the kit and add it below the regular tube layer, resizing to your liking and add drop shadow to it also.

Copy & Paste element5 as a new layer, resize to your liking,add drop shadow, place down toward the bottom of the frame, below the tube layer.

Crop down the image or resize it if needed.

Add copyright info and text and you're now ready to save.

I hope you enjoyed my tut!