Wednesday, March 31, 2010

Award Time!


I am so honored to have received this award from Shal!
I wanted to go ahead and get it posted.
I'll be back at a later time to award it to other well deserving blogs.
Be sure to check out Shal's World! She is an awesome Tut Writer and Scrapkit Designer!!!

Queen of Hearts


Queen of Hearts
This tutorial was written by Jenny on 3/31/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of AV Phibes. You need a license to use this artwork. I am licensed through Artistic Minds Inc. You can now purchase her tubes through Mistaken Art.

Supplies Needed:
1 Tube of choice
Template 118 by Rachel at Scraps of Enchantment
Alice FTU Scrapkit by Sticky Kisses Designs
WSL_Mask302 by Weescotslass
Font of choice (I'm using Christopherhand)

Open template. Hide credit layer, shift d to duplicate, close original.

Image, canvas size and change the size to 800 x 500 (we'll resize it smaller later).

Unhide Raster1, flood fill the rest with white.

New raster layer, select with magic wand, copy & paste Paper9 into selection, select none, apply mask.

Select background1, selections,select all, float, defloat, copy & paste Paper5 as a new layer, resize 80%, selections,invert,delete,select none, hide original.

Select frame1, selections, select all, float,defloat, new raster layer, flood fill with color of choice, select none, hide original.

Select background2, repeat same step as background1 changing the paper to Paper13.

Select frame2, repeat the same step for frame1 using a different color.

Select background 3 repeat same as background2 changing the paper to Paper8.

Select frame3, repeat same for frame2 changing the color.

Add a drop shadow of choice to each of the new frame layers.

Copy & Paste tube of choice, resize if needed, add slight drop shadow, see my tag for placement.

Copy & Paste flower2 as a new layer, resize 65%, add drop shadow, place to the right of the canvas over the flower doodle.

Copy & Paste mushroom, resize to your liking, place behind the flower layer, add drop shadow, see my tag.

Copy & Paste ribbon1 as a new layer, resize 85%, see my tag for placement.

Copy & Paste doodle as a new layer, resize 75%, add drop shadow, place above the other flower doodle on the left side.

Copy & Paste crown as a new layer, resize 50%, add drop shadow and place to your liking.

Copy & Paste groupflowers as a new layer, resize 50%, mirror, add drop shadow and place to the left above the doodle.

Duplicate your tube layer, move above the new background2 layer, select the background2 layer, selections,select all, float, defloat, invert, delete on the tube layer, select none, apply texture effects blinds with default settings.

Now you can resize the canvas.

Add copyright info and text and you're now ready to save it.

Thank you for trying my tut. I would love to see your results.





Wednesday, March 24, 2010

No Time


No Time
This tutorial was written by Jenny on 3/26/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Richard Hubbard. You need a license to use his artwork. I'm licensed through MyTagArt. Please check his site for future licensing.

Supplies Needed:
2 images or tubes of choice
template 63 by Sara
Down the Rabbit Hole FTU Scrapkit by Grunge & Glitter
Font of choice (I'm using Jellyka Gare de Chambord)

Open template, hide credit layer, shift d to duplicate, close original.

If you do not want a transparent background then add a new raster layer, flood fill with white and move to the bottom.

Select oval, selections, select all, float, defloat, copy & paste Paper1 as a new layer, resize 85%, selections,invert,delete, select none, hide original.

Select rectangle1, selections, select all, float, defloat, copy & paste Paper5 as a new layer, resize 80%, selections, invert,delete, select none, hide original.

Select rectangle2, selections, select all, float, defloat, copy & paste Paper2 as a new layer, selections, invert,delete,select none, hide original.

Copy & Paste grassyhills as a new layer, resize to approx 80%, see my tag for placement, duplicate, mirror.

Copy & Paste doodle2 as a new layer, resize to your liking, mirror, flip, see my tag for placement.

Select frame background 1, selections,select all, float, defloat, copy & paste image of choice as a new layer, resize if needed, selections, invert,delete,select none, hide original.

Repeat on frame background using a different image.

Select rectangle3, selections, select all, float, defloat, copy & paste Paper4 as a new layer, selections,invert,delete,select none, hide original.

Copy & Paste heartrosetree as a new layer, resize to your liking, place in the upper top right corner.

Copy & Paste glass arrow as a new layer, resize to your liking, see my tag for placement.

Copy & Paste pocketwatch as a new layer, resize to your liking, place at the bottom right of your canvas.

Copy & Paste redrose as a new layer, resize to your liking, place to the left of the canvas.

Copy & Paste rabbit as a new layer, resize to your liking, place in the middle toward the bottom.

Merge visible. Resize canvas if you'd like. Add copyright info and text and you are now ready to save your creation.

Thank you for trying my tutorial. I would love to see your results.

Saturday, March 13, 2010

Soooo Eggcited


Soooo Eggcited
This tutorial was written by Jenny on 3/13/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Jennifer L. Nilsson. You need a license to use her artwork. I have a license through MyTagArt.
Please check her site for new licensing information.

Supplies Needed:
1 tube and image of choice
Like...OMG FTU Scrapkit by Pink Princess Scraps
Easter Template by Artmama's Studio
WSL_Mask238 by Weescotslass
Font of choice (I'm using SP Emily Faith)

Open template, hide credits, shift d to duplicate, close original.

Image, canvas size, 700 x 600.

Hide Raster 10.

New raster layer, flood fill white, move to the bottom.

New raster layer, selections, select all, float, defloat, copy & paste pp7 into selection, select none, apply mask, move it upward and to the right, duplicate,mirror, flip, downward.

Select small rect. frame, selections, select all, float, defloat, new raster layer, flood fill with color of choice, select none, hide original.

Repeat this step on rect. frame, cir middle, sm.cir.frame.

On the small rectangle, recolor to match using your Change to Target Brush.

Select rectangle, selections, select all, float, defloat, copy & paste pp9 as a new layer, resize 65%, selections,invert,delete,select none, hide original.

Hide tiny text.

On the cir. back recolor as above.

Select circle layer, selections,select all, float, defloat, copy & paste pp10 as a new layer, selections,invert,delete,select none, hide original.

Select sm.circle, select all, float, defloat, copy & paste image of choice, resize to your liking, selections,invert,delete, select none, hide original.

Select long rect., select all, float, defloat, new raster layer, flood fill with another color of choice, select none, apply noise if you'd like, hide original.

Select egg, selections, select all, float, defloat, copy & paste pp8 as a new layer, resize 65%, selections,invert,delete,select none, selections, select all, float, defloat, selections,modify,expand, 4, new raster layer, flood fill with color of choice, select none, hide original egg layer.

Recolor the fade and stripes.

Recolor short rect.

Copy & Paste book (ele42), resize to your liking, see my tag for placement.

Move word art to the top.

Recolor hearts and move them to your liking.

Copy & Paste balloons and sparkles as new layers, resize and place to your liking.

Copy & Paste tube as a new layer, resize if needed, see my tag for placement.

Resize canvas if you'd like. Add copyright info and text and you're now ready to save.

Thank you for trying my tut. I'd love to see your results.



It's A Jungle Out There


It's A Jungle Out There
This tutorial was written by Jenny on 3/13/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Sally Gilroy. You need a license to use her artwork. I have a license through MyTagArt.
You can now purchase her tubes through Scraps N Crap.

Supplies Needed:
Several tubes of choice
Scrapkit of choice or
the PTU one I'm using Jungle Fever by Soxsational Scraps
Mask of choice (I'm using one by Becky)
tagtemplate_306 by Missy at Divine Intentionz
Font of choice (I'm using Smiley Monster)
MuRa's Meister Copies (optional)

Open template, hide credits and wordart, shift d to duplicate, close original.

Image, canvas size, 700 x 600 (well resize later).

New raster layer, flood fill with white.

New raster layer, select with magic wand, copy & paste paper of choice into selection, select none, apply mask, duplicate.

Copy & Paste vine 2 as a new layer, resize 50%, effects, plugins, MuRa's Meister Copies, encircle, default settings, move to the upper right corner, duplicate, mirror, flip.

Open flower of choice, repeat step above, don't flip, see my tag.

Select circle, selections, select all, float, defloat, copy & paste paper of choice as a new layer, resize if needed, selections, invert, delete,select none, hide original.

Select glittered circle, use the Change to Target Brush to recolor to match your scraps.

Select small circle, selections, select all, float, defloat, copy & paste paper of choice as a new layer, selections, invert, delete, select none, hide original.

Select filmstrip background, selections ,select all, float, defloat, copy & paste paper of choice as a new layer, resize if needed, copy & paste each of your tubes as a new layer, resizing as needed, selections,invert,delete on paper layer, delete on each tube layer, select none, hide original filmstrip background.

Copy & Paste flowers of choice as a new layer, resize if needed, place behind the clown, duplicate,mirror,bring the duplicated layer up above the medium circle and frame layer, see my tag.

Select medium circle, selections, select all,float,defloat, copy & paste paper of choice as a new layer, resize if needed, selections, invert, delete, select none, hide original.

Copy & Paste circle frame of choice as a new layer, resize and place over medium circle layer.

Copy & Paste grass as a new layer, resize if needed, place at the bottom of the filmstrip.

Copy & Paste the rest of your tubes as new layers, resize and place to your liking.

Copy & Paste flowers of choice, resize to your liking and adorn the frame with them.

Now is the time to resize the canvas if you'd like. Add copyright info and text and you're now ready to save.

Thank you for trying my tut. I'd love to see your results.



Magical Spring Time


Magical Spring Time
This tutorial was written by Jenny on 3/13/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Katy Jones. You need a license to use her artwork. I have a license through MyTagArt.
Please check her site for new licensing information.

Supplies Needed:
1 Tube of choice
Spring Magic FTU Scrapkit by Soxsational Scraps
template 59 by Saras Scraps
WSL_Mask302 by Weescotslass
Font of choice (I'm using heyboy!heygirl!)

Open template, hide credits and all wordart, shift d to duplicate, close original.

New raster layer, send to bottom, flood fill with white.

New raster layer, select with magic wand, copy & paste Paper3 into selection, select none, apply mask.

Select rectangle 1, selections, select all, float, defloat, copy & paste Paper12 as a new layer, selections, invert,delete,select none, hide original.

Copy & Paste stem2 as a new layer, move below rectangle layer, resize to your liking.

Copy & Paste rainbow, resize to your liking, see my tag for placement.

Select rectangle 2, selections, select all, float, defloat, copy & paste Paper10 as a new layer, selections, invert, delete,select none, hide original.

Select rectangle3, selections, select all, float, defloat, copy & paste Paper2 as a new layer, resize 60%, selections, invert, delete, select none, hide original.

Copy & Paste cloud as a new layer, move below the rectangle3 layer, resize to your liking.

Select rectangle4, selections, select all, float, defloat, copy & paste Paper11 as a new layer, selections, invert, delete, select none, hide original.

Copy & Paste tube as a new layer, resize if needed, place to the right of the canvas.

Copy & Paste fence3 as a new layer, resize to your liking, mirror, place to the opposite of the tube.

Copy & Paste grass2 as a new layer, resize if needed, place toward bottom of tube and fence.

Copy & Paste frog and ladybug each as a new layer, resize and place to your liking.

Copy & Paste bow of choice as a new layer, resize to your liking, place upon the fence.

Add copyright info and text and now you are ready to save.

Thank you for trying my tutorial. I'd love to see your results.


Sunday, March 7, 2010

Ship Wrecked


Ship Wrecked
This tutorial was written by Jenny on 3/7/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Matt Hawk. I am using the Photography of Karron Cobb Weiss. You will need a license to use this artwork/photography. I am licensed to both through MyTagArt. Please check Matt Hawk's and Karron Cobb Weiss's site link above to keep up to date on any future licensing.

Supplies Needed:
1-2 tubes of choice from same artist
1 photo of choice
Scrapkit of choice
The one I'm using is Pirates Life PTU by Soxsational Scraps (this kit is no longer available)
Template 0901 by Designs by Vaybs
WSL_Mask302 by Weescotslass
Fonts of choice (I'm using PiratesBlackbear and PiratesStoertebecker)

Open template, hide credits, shift d to duplicate, close original.

Unhide the background layer, new raster layer, select with magic wand, copy & paste paper of choice (Paper03) into selection, select none, apply mask, duplicate.

Select Copy Of Raster 2, selections, select all, float, defloat, copy & paste paper of choice as a new layer (Paper10), selections, invert, delete, select none, hide original.

Select Raster 2, selections,select all, float, defloat, copy & paste paper of choice as a new layer (Paper07), selections,invert,delete,select none, hide original.

Select Raster 9, selections, select all, float, defloat, new raster layer, flood fill with color of choice, selections, select none, hide original.

Select Raster 4, selections, select all, float, defloat, copy & paste photo of choice, resize if needed, selections, invert,delete,select none, hide original.

Select Raster 3, selections, select all, float, defloat, copy & paste paper of choice (Paper01) as a new layer, selections, invert,delete,select none, hide original.

Select Raster 5, selections, select all, float, defloat, copy & paste paper of choice (Paper10), resize if needed, selections, invert,delete, select none, hide original.

Select Raster 6, selections, select all, float, defloat, copy & paste paper of choice (Paper12), resize if needed, selections, invert,delete, select none, hide original.

Select Copy of Raster 9, selections, select all, float, defloat, new raster layer, flood fill with color of choice, selections, select none, hide original.

Select Raster 7, selections, select all, float, defloat, copy & paste image or tube of choice, resize if needed, selections, invert,delete, select none, duplicate, on the duplicate layer, adjust, blur, gaussian blur 3, right click, change blend mode to overlay, hide original Raster 7.

Select Raster8, selections, select all, float, defloat, copy & paste paper of choice (Paper08) as a new layer, resize if needed, selections,invert,delete,select none, hide original.

Copy & Paste tube of choice as a new layer, resize if needed, duplicate, adjust, blur, gaussian blur 3, right click, change blend mode to overlay.

Now you can add your treasure chests, coins or any other embellishments you'd like (see my tag).

Resize canvas if you'd like. Add copyright info and text and now you're ready to save.
I'd love to see your results!








Chasing Rabbits


Chasing Rabbits
This tutorial was written by Jenny on 3/7/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Lacy Clagg. You need a license to use her artwork. I am licensed through MyTagArt.
You can now purchase her tubes at Creative Design Outlet.

Supplies Needed:
1 tube of choice
Down The Hole FTU Scrapkit by Candy's Treats
missy_tagtemplate332 by Missy at Divine Intentionz
Font of choice (I'm using Linda's Lament)

Open tag template, hide credits, shift d to duplicate, close original.

There are a lot of steps so I'm going to attempt to condense them for you.

On rectangle right, rectangle left, circle left, circle right, circle1, circle2, circle3,rectangle center, frame 2 background, frame 1 background, you will need to do the following to each:
be sure to change the paper each time or add a new raster layer and flood fill with a different color each time.
Select, selections, select all, float, defloat, copy & paste paper of choice, resize to your liking, selections, invert,delete, OR new raster layer and flood fill, select none, hide original.

On all the glittered circle layers, frames and the rectangle in the center, use the Change to Target Brush to recolor, change the colors up each time.

Copy & Paste tubes as a new layer, resize to your liking and place accordingly, add a subtle drop shadow to each.

Copy & Paste heart doodle as a new layer, resize if needed, add drop shadow, place behind main tube.

Copy & Paste flowers, hat, balloon and cupcake all as new layers, resize to your liking and place to your desire, add a subtle drop shadow to each.

On the word art layer you may want to resize it just a bit and move it down toward the bottom or even hide it if you want to.

Resize canvas if you'd like. If you don't want to save as a transparent PNG then please make sure you unhide the white background. Now add copyright info and text and you are now ready to save.

Thank you for trying my tutorial. I would love to see your results.




For The Love of Easter


For The Love of Easter
This tutorial was written by Jenny on 3/7/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Jennifer L. Nilsson. You need a license to use her artwork. I have a license through MyTagArt.
Please check her site for new licensing information.

Supplies Needed:
1 tube and image of choice
Scrapkit of choice or the one I'm using- Spring Fling by Monti
Lin_Deb_CM_template1 by Linda & Deb located HERE
WSL_Mask226 by Weescotslass
Font of choice (I'm using PZ.Egg)

Open template, hide credits and all word art layers, shift d to duplicate, close original.

Unhide background layer, new raster layer, select with magic wand, copy & paste Paper5 into selection, select none, apply mask, move lower left corner, duplicate, mirror, upper right corner, merge the 2 mask layers together.

Copy & Paste Glitter Spiral of choice as a new layer, resize if needed, place in the upper right corner.

Select rectangle layer, one at a time click in each rectangle and copy & paste a paper of choice, resize if needed, selections, invert, delete on each layer, select none, hide original.

Select Glitter Oval, use the Change to Target Brush to recolor the glitter to match your supplies.

Select oval, selections, select all, float, defloat, copy & paste Paper1 as a new layer, copy & paste Ribbon of choice as a new layer, selections, invert,delete on paper layer, delete on ribbon layer,select none, hide original.

Select the star, selections, select all, float, defloat, copy & paste image of choice as a new layer, resize if needed, selections, invert, delete, select none, hide original.

Copy & Paste bow of choice, resize to your liking, add a subtle drop shadow, place to the right (see my tag).

Copy & Paste Pendant of choice as a new layer, place ontop of the bow, resize if needed, use the eraser to remove just a bit of the ring.

Copy & Paste flowers of choice as a new layer, arrange to your liking.

Copy & Paste tube as a new layer, resize if needed, add a subtle drop shadow, place to your liking.

Resize the canvas if you'd like. Add copyright info and text and you are now ready to save.

Thank you for trying my tutorial.




Saturday, March 6, 2010

Lucky Charm


Lucky Charm
This tutorial was written by Jenny on 3/6/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Renee Lavoie. You need a license to use her artwork. I have a license through MyTagArt.
Please check her site for new licensing information.

Supplies Needed:
1 Tube of choice
Kiss Me FTU Scrapkit by Sticky Kisses Designs (download at Creative Misfits Creations)
Rainbow of choice (I got mine HERE)
Kirsty07_Mask by Kirsty's Scraps
Lucky Charm Template by Jenny
Font of choice (I'm using AL Verdigris)

Open template, hide credit, shift d to duplicate, close original.

Use the Change to Targer Brush to recolor the doodles, wordart and shamrocks.

Unhide background layer, new raster layer, flood fill with color of choice ( I used a matching gradient), apply mask.

Select Side Bar1, selections,select all, float, defloat,new raster layer, flood fill with color of choice, select none, apply noise, hide original.

Repeat on Side Bar 2 using a different color.

Repeat on bar 1 and bar 2 switching the colors up and do not apply the noise.

Select Frame Outline, selections, select all, float, defloat, new raster layer, flood fill with a matching coloring, select none, add noise, hide original.

Select frame, selections, select all, float, defloat, copy & paste paper of choice as a new layer, resize if needed, selections, invert,delete,select none, hide original.

Copy & Paste pot of gold as a new layer, resize if needed, add drop shadow.

Open rainbow, resize 150%, copy & paste as a new layer onto canvas, add drop shadow.

Copy & Paste tube of choice, resize if needed, add drop shadow, place to your liking.

If using the same tube as me you may want to copy & paste the extra lily pad as a new layer, see my tag for placement, duplicate, mirror.

Copy & Paste clover border as a new layer, resize to your liking, add drop shadow, duplicate, mirror.

Copy & Paste felt flower as a new layer, resize to your liking, add drop shadow, see my tag for placement.

Resize canvas if you want to. Add copyright info and text and you are now ready to save the tag.

Thank you for trying my tut. I would love to see your results.

The Magic of Love


The Magic of Love
This tutorial was written by Jenny on 3/6/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Kat NKDA. You need a license to use her artwork. I am licensed through Artistic Minds Inc. They are no longer open for business. Please use supplies of choice or visit Kat's link for purchase options.

Supplies Needed:
Tree of Love Bundle 12 by Kat NKDA or 1 tube of choice and scrapkit of choice
WSL_Mask260 by Weescotslass
Rose & Pure Magic Collab Temp_4 found HERE
Font of choice (I'm using Not His Angel)

Open template, hide all wordart and credits, shift d to duplicate, close original.

unhide raster 1.

New raster layer, select with magic wand, copy & paste paper of choice into selection, select none, apply mask.

Select Raster 4 layer, selections, select all,float, defloat, copy & paste paper15 as a new layer, selections,invert,delete, select none, hide original.

Select Raster 2, selections, select all, float, defloat, copy & paste paper05 as a new layer, resize 75%, selections, invert,delete,select none, hide original.

Select Raster 6, selections, select all, float, defloat, copy & paste paper14 as a new layer, resize 75%, selections, invert,delete,select none, hide original.

Use the Change to Target Brush to recolor the hearts to match the supplies.

Copy & Paste the tree if you are using the same kit, resize to your liking.

Copy & Paste tube of choice, resize if needed, add a subtle drop shadow.

Copy & Paste the leaves as a new layer, mirror, flip, resize to your liking, see my tag for placement.

Copy & Paste the curtain (element 10) as a new layer, resize 85%, add a subtle drop shadow, see my tag for placement.

Copy & Paste roses each as a new layer, resize to your liking, add a drop shadow to each and see my tag for placement.

Copy & Paste a bow of choice, resize to your liking and place upon the curtain.

Copy & Paste bird as a new layer, if you're using the same kit you will need to resize it several times, add drop shadow and place upon the roses.

Copy & Paste dangling heart (element30) as a new layer, resize, add drop shadow and place in the upper right hand corner.

Now you can adorn the tag with any other embellishments and resize the canvas if you'd like.

Add copyright info and you are now ready to save the tag.

Thank you for trying my tutorial. I would love to see your results.

Monday, March 1, 2010

Feeling Lucky


Feeling Lucky
This tutorial was written by Jenny on . Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Ismael Rac. You need a license to use his artwork. I am licensed through Artistic Minds Inc.
You can now purchase his tubes HERE.

Supplies Needed:
1 Tube of choice
WSL_Mask222 by Weescotslass
Happy St Patrick Day FTU Scrapkit by ScrappingMar
Font of choice (I'm using Erin Go Bragh)


Open a new canvas 700 x 700. Flood fill white.
New raster layer, select with magic wand, copy & paste Paper13 into selection, select none, apply mask.

Copy & Paste tube of choice as a new layer, resize if needed, add drop shadow, see my tag for placement.

Copy & Paste harp as a new layer, resize 75%, add drop shadow, place below tube and to the left.

Copy & Paste dangling beads of choice as a new layer, resize to you liking, add drop shadow, place on the harp.

Copy & Paste Pot of Gold as a new layer, resize 75%, place below tube and to the right, add drop shadow.

Copy & Paste balloons as a new layer, resize 75%, add drop shadow, place above pot of gold.

Copy & Paste heart flower of choice, resize 50%, add drop shadow, place toward bottom of the tube, duplicate, mirror.

Copy & Paste several other flowers and ribbon of choice, resize as needed, add drop shadow to each and arrange to your liking.

Copy & Paste 4 leaf clover of choice, resize to your liking, add drop shadow, place above flowers.

Crop or resize the tag to your desire. Add copyright info and text and you are ready to save.

Sparkle


Sparkle
This tutorial was written by Jenny on 3/01/2010 . Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Kat NKDA.
You need a license to use her artwork. You need a license to use her artwork. I am licensed through Artistic Minds Inc. They are no longer open for business. Please use supplies of choice or visit Kat's link for purchase options.


Supplies Needed:
1 tube or image of choice
Stargazer PTU Scrapkit by KatNKDA
(You can purchase this at Artistic Minds under Bundles)
missy_tagtemplate313 by Missy at Divine Intentionz
Font of choice (I'm using Lindsay Cutup)

Open template, hide credits, shift d to duplicate, close original.

Select small circle1 with magic wand, copy & paste Paper06 as a new layer, selections,invert,delete, select none, hide original.

Select square1 with magic wand, copy & paste Paper02 as a new layer, resize 65%, selections,invert,delete,select none, hide original.

Select square2 with magic wand, copy & paste Paper07 as a new layer, resize 65%, selections,invert,delete,select none, hide original.

Select small circle1 with magic wand, copy & paste Paper08 as a new layer, resize 55%, selections,invert,delete, select none, hide original.

Copy & Paste the mask layer as a new layer, move over towards the right.

Select large circle1 with magic wand, copy & paste Paper01 as a new layer, resize 85%, selections,invert,delete,select none, hide original.

Select rectangle with magic wand, copy & paste Paper08 as a new layer, selections, invert,delete,select none, hide original.

Open element44, free rotate 90 degrees, copy & paste as a new layer onto the canvas, placing above rectangle layer, resize 80%, add drop shadow.

Select large circle2 with magic wand, copy & paste Paper09 as a new layer, resize 85%, selections,invert,delete,select none, hide original.

Select background frame with magic wand, copy & paste Paper10 as a new layer, resize 65%, selections,invert,delete, select none, hide original.

Copy & Paste tube of choice, resize if needed, keeping under the frame, use the selection tool to remove and excess from the bottom, if you want the top to stick out from the frame then select that portion with your freehand tool, right click, promote selection to layer, right click, arrange, bring to top, select none, add drop shadow to original tube.

Add drop shadow to the frame layer.

Now you need to add the ribbon to the frame, resizing as needed, add drop shadow.

Add flowers, glitter,ect and place to your liking.

Use the Change to Target Brush to recolor the wordart and you may need to resize or move the wordart.

Resize the canvas if needed. Add copyright info and text and now you're ready to save.

I appreciate you stopping by to try my tuts. Remember a little love can last a life time. Drop off some in my CBox!


Love Me, Follow Me



Love Me, Follow Me


This tutorial was written by Jenny on 3/1/2010 . Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Camilla Drakenborg
You need a license to use her artwork. I have a license from Artistic Minds Inc.
Please visit her site link above for more licensing info.

I appreciate you stopping by to try my tuts. Remember a little love can last a life time. Drop off some in my CBox!

Supplies Needed:
1 tube and image of choice
Follow Me Add On Freebie by MaryPop Designs
scroll down
Vix_Mask172 by Vix
Font of choice (I'm using Al Verdigris)

Now before we get started let me remind you that this is a full size kit and not a tagger size kit so you are going to need to resize each layer by atleast 50% x's 3 each time I say resize (unless otherwise stated), sometimes even more, just use your judgement.

Open a new canvas 500 x 500 flood fill white. New raster layer,select with magic wand.
Open free2 (green paper), resize 50% twice, copy & paste into selection, select none, apply mask, add drop shadow to mask layer.

Copy & Paste frame as a new layer, resize, place in the center of the canvas.

Copy & Paste image, move below frame, resize if needed, use selection tool to remove any excess from frame, merge frame and image visible and bring it upward just a bit.

Copy & Paste image as a new layer, see my tag for placement, resize if needed, add drop shadow.

Copy & Paste free (10) (vine) as a new layer, resize, add drop shadow, place on the frame top left corner, move below tube, duplicate,flip.

Select the tube layer.

Copy & Paste the flowers, leafs,ect and place as a new layer, resizing each, add a drop shadow to each and arrange to your liking toward the bottom of the tube.

Copy & Paste free (9) (circle blotches) as a new layer, resize, place above mask layer upward right, duplicate,mirror, flip.

Copy & Paste word art, recolor if needed, selections,select all, float,defloat, new raster layer, flood fill with a complinetary color, move below, select none, add drop shadow.

Add copyright info and text and you are now ready to save.

Thank you for trying my tutorial.

Blue Rain


Blue Rain
This tutorial was written by Jenny on 3/1/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Susan Mckivergan. You need a license to use her artwork. I am licensed to this image through Artistic Minds Inc. They are now closed. You can now find Susan's artwork licensed to UpYourArt.

Supplies Needed:

1 Tube of choice
Outside the Rain FTU Scrapkit by Nightbirds Designz
WSL_Mask226 by Weescotslass
MuRa's Meister Copies (optional)
Font of choice (I'm using TheNautiGal ROB)


Open a new canvas 700 x 700 flood fill white.

New raster layer, select with magic wand, copy & paste Paper2 into selection, select none, apply mask.

Copy & Paste tube as a new layer, resize if needed, add drop shadow.

Copy & Paste branches3 as a new layer, resize 75%, add drop shadow, free rotate 90 degrees left, place to the left of the canvas, duplicate,mirror.

Copy & Paste flower1 as a new layer, resize 75%, add drop shadow, place to the left bottom, duplicate,mirror.

Copy & Paste flower2 as a new layer, resize 65%, add drop shadow, place bottom middle, duplicate,mirror.

Copy & Paste string 2 as a new layer, resize 65%, add drop shadow, place on flowers.

Copy & Paste teardrop 2 as a new layer, resize 65%, add drop shadow, move above mask layer, apply MuRa's Meister Copies Encircle default settings.

Copy & Paste Rose3 as a new layer, resize 65%, place below tube layer, add drop shadow, duplicate,mirror,duplicate, resize 65%, move over just a bit, see my tag.

Crop or resize the canvas to your liking. Add copyright info and text and you are ready to save.