Tuesday, January 19, 2010

Be Mine

Be Mine
This tutorial was written by Jenny on 01/19/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Sally Gilroy. You need a license to use her artwork. I have a license through MyTagArt.
You can now purchase her tubes through Scraps N Crap.



Supplies Needed:
1 Tube
L'Amour PTU Scrapkit by Krissy's Scraps
(You may have been able to grab it while it was a limited time freebie)
Rose & Kristin Collab Template2 can be downloaded from HERE or HERE
WSL_Mask84 by Weescotslass
Font of choice (I'm using Inspiration)


Open template, close credit layer, shift d to duplicate, close original.

Select background layer, new raster layer, select with magic wand, copy & paste Paper10 into selection, select none, apply mask.

Select rectangle layer, selections,select all, float, defloat, copy & paste Paper6 as a new layer, selections,invert,delete, select none, hide original.

Select glitter oval layer, selections,select all, float,defloat, using 2 colors from the scrapkit make a gradient and flood fill selection, select none, apply noise, hide original layer.

Select oval layer, selections, select all, float, defloat, copy & paste Paper12 as a new layer, resize 85%, selections,invert,delete,select none, hide original.

Select Raster3 layer, selections,select all, float,defloat, copy & paste Paper5 as a new layer,resize 65%,selections,invert,delete,select none, hide original.

Use the Change to Target Brush to recolor Raster4.

Select Raster5, selections,select all, float, defloat,new raster layer, flood fill with a color that compliments your tube or scrapkit, apply some noise, select none, hide original layer.

Copy & Paste painted flower1 as a new layer, see my tag for placement, add drop shadow, resize 65%, duplicate, mirror, flip.

Copy & Paste bow of choice as a new layer, resize to around 50%, add drop shadow, free rotate left 10 degrees, see my tag for placement.

Copy & Paste tube as a new layer, resize if needed, add drop shadow, see my tag for placement.

On each the white heart and teal heart you will need to do the following:

Selections,select all, float,defloat, new raster layer, flood fill with a matching color,select none, apply noise, hide original, selections, modify,expand 2, new raster layer, flood fill white, select none, move to the bottom, apply noise again.

Copy & Paste Blossom of choice as a new layer, resize to your liking and place to the left, add drop shadow.

Copy & Paste Ice Bucket 1 as a new layer, resize 65%, add drop shadow, place to the bottom left of your tube.

Copy & Paste Glass1 as a new layer, resize to your liking, add drop shadow, place to the bottom right of your tube.

Use the Change to Target Brush to recolor the doodle to match the scrapkit.

Repeat with wordart layer.

Add copyright info and text and you are ready to save.



Friday, January 15, 2010

Love Is In The Air


Love Is In The Air

This tutorial was written by Jenny on 01/15/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Sally Gilroy. You need a license to use her artwork. I have a license through MyTagArt.
You can now purchase her tubes through Scraps N Crap.


Supplies Needed:
1-2 Tubes of choice (from the same artist)
Sweetheart's Dance PTU Scrapkit by Sally Gilroy
(licensed through MyTagArt and no longer available)
Yvette_EOC_Template94 by Yvette at Essence of Creativity
WSL_Mask260 by Weescotslass
Font of choice (I'm using LMS School Girl Crush and Christopherhand)


Open template, hide credits, shift d to duplicate, close original.

Unhide the background layer, new raster layer, select with magic wand, copy & paste Paper of choice into selection, select none, apply mask.

Select black circle with magic wand, copy & paste paper of choice as a new layer, resize if needed, selections,invert, delete,select none, hide original.

Select white half with magic wand, copy & paste another paper of choice as a new layer, resize if needed, selections,invert,delete,select none, hide original.

Repeat on Pink half changing the paper.

Repeat again on Pink rectangle, thin black rectangle and Pink circles changing the paper each time.

Use the change to target brush to recolor the words and hearts to match your scrapkit or tube.

Copy & Paste doodle, resize if needed, move below all layers but above mask, add drop shadow, duplicate, mirror.

Select the very top layer.

Copy & Paste tube(s) as a new layer, resize if needed, add drop shadow.

Now you can adorn your tag with roses, hearts, letters, bows, ribbons, candles and butterflies, resizing as needing. You can place to your liking or see my tag for placement. Add a subtle drop shadow to each. I rotated the roses just a bit to get the arrangement I have.

Now is the time to resize or crop the canvas. Add copyright info and text and you are ready to save.

I appreciate you stopping by to try my tuts. Remember a little love can last a life time.
Drop off some in my CBox!

Pink, It's A Bunny Thing


Pink, It's A Bunny Thing

This tutorial was written by Jenny on 01/15/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Lacy Clagg. I am using the photography of Brittany Wright. You need a license to use this artwork and/or photography.
I am licensed through MyTagArt for both.
You can now purchase Lacy Clagg's tubes at Creative Design Outlet.



Supplies Needed:
1 Tube of choice
5 photos of choice (from the same photographer)
Breast Cancer FTU Scrapkit by Nightbirds Designz
missy_tagtemplate311 by Missy at Divine Intentionz
Font of choice (I'm using Urban Constructed-Regular)



Open template, hide credits, shift d to duplicate, close original.

Select circle layer with magic wand, copy & paste Paper-5 as a new layer, selections,invert,delete on the paper layer, select none, hide original.

Select circle2 with magic wand, copy & paste Paper-1 as a new layer, selections,invert,delete on paper layer, select none, hide original.

Select circle half with magic wand, copy & paste photo of choice as a new layer, position to your liking over the circle half, selections,invert,delete, select none, hide original.

Select the first of the 3 framed background with your magic wand, copy & paste another photo of choice as a new layer, resize if needed, selections, invert,delete, repeat this step on the next 2 squares using different photos if you'd like, once you have filled the 3 squares you will need to hide the original framed background.

Using the Change to Target Brush, recolor the pink punk and wordart to your liking.

On the 3 Frame add a subtle drop shadow of choice.

Select the frame background layer, copy & paste another photo of choice as a new layer, resize if needed, rotate if needed fitting it under the frame, hide original background layer.

On the frame add a subtle drop shadow same as before.

Copy & Paste tube, resize if needed, add drop shadow, place to your liking.

You may want to move the wordart around or even resize it just a bit.

You can now add the flowers, ribbons, ect of your liking, resize each to your liking, add drop shadow to each and place accordingly.

If you would like to resize or crop the tag please do so at this time.

Now you will need to add your copyright info and any text. You are now done and ready to save.

Thank you for trying my tutorial. If you enjoyed it please leave some love in my CBox!


Tuesday, January 5, 2010

Be Mine


Be Mine

This tutorial was written by Jenny on 01/04/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Richard Hubbard. You need a license to use his artwork. I am licensed through MyTagArt. Please check his site for future licensing.


This tutorial is animated but the preview doesn't show it.


Supplies Needed:
2 tubes from same artist
Scrapkit of choice (I'm using Be Mine FTU Scrapkit by Sentimental Style)
WSL_Mask225 by Weescotslass
Font of choice (I'm using P22 Corinthia)


Plug In Needed: Alien Skin Xenofex 2 Constellation (optional)
MuRa's Meister Copies (Optional)
Animation Shop (Optional)


Open a new canvas 700 x 700 and flood fill white.

New raster layer, select with magic wand, copy & paste Paper2 into selection, select none, apply mask, duplicate.

Copy & Paste chipboard frame as a new layer, free rotate right 90 degrees, add drop shadow.

Copy & Pate Paper of choice, move below frame, use selection tool to remove excess.

Copy & Paste 2 tubes of choice and arrange to your liking, resize and add drop shadow to each.

Copy & Paste flower as a new layer, resize, add drop shadow, apply default MuRa's Meister Encircle.

Copy & Paste bow of choice as a new layer, add to frame, resize to your liking, add drop shadow.

Copy & Paste diamond as a new layer, place on bow, duplicate,image,mirror,flip.

Copy & Paste metal tags as a new layer and adorn the frame with them, add a drop shadow.

Now you are ready to resize or crop the image. Add copyright info and text.

If you are not going to animate then it's time to save.


If you are then follow these steps. You may want to play around with them as I did.

Hide Mask(s) layer and background layer, merge all other layers visible, unhide.
Hide merged layer and background layer and merge the 2 mask layers visible, unhide.

On the mask layer apply Alien Skin Xenofex2 with the settings below:

3.00

40

10

0

75

25

45

Keep Original

Random Seed 5500

Copy Merged and paste as a new animation in animation shop.

Back in PSP, undo, apply again changing the Random Seed by clicking it once, copy merged, paste after animation in animation shop. Repeat once more.

In animation shop you should have 3 layers. Select all, animation, frame properties 15.

Now you are ready to save as a gif.
TOD






Valentine Kisses


Valentine Kisses

This tutorial was written by Jenny on 01/04/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Chrissy Clark. You need a license to use her artwork. I am licensed through MyTagArt.
You can now purchase her tubes at Creative Design Outlet.


Supplies Needed:
1 Tube of choice
Kisses FTU Scrapkit by Sentimental Style
WSL_Mask261 by Weescotslass
Font of choice (I'm using Satisfaction)


Open a new canvas 700 x 700. Flood fill white.

New raster layer, select with magic wand, copy & paste Paper4 into selection, select none, apply mask.

Copy & Paste tube as a new layer, add drop shadow, resize if needed, see my tag for approx. placement.

Copy & Paste silverhearts as a new layer, add drop shadow, place upward right of canvas, duplicate and place downward left.

Copy & Paste stitchedheart as a new layer, place below tube, upward left.

Copy & Paste heart stitch as a new layer, place below tube and to the right.

Copy & Paste license plate as a new layer, move below tube and over to the right, add drop shadow.

Copy & Paste bow as a new layer, add to the stitchedheart,add drop shadow.

Copy & Paste each of the flowers as a new layer, add drop shadow to each, arrange to your desire, duplicating if needed, see my tag.

Resize canvas to your liking. Add copyright info and text and you're ready to save.
TOD



Monday, January 4, 2010

Grand Opening: Tut Stop

Photobucket


Tut Stop is a new forum that wanted to provide a service for both tutorial writers looking for an easy venue to advertise their new tuts, and for the traditional tagger to have "one stop shopping" when looking for a new tutorial to work on. Now both can come to one place.

There is a contest going on right now for chances to win prizes.

When joining please be sure to go HERE and let them know that Jenny aka Impatientangelinhiding sent you.

Sunday, January 3, 2010

Emerald


Emerald


This tutorial was written by Jenny on 01/03/2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Marianne Mathiasen. You need a license to use her artwork. I am licensed through MyTagArt. You can check her site to keep up to date on future licensing.


Supplies Needed:
1 tube and image of choice from same artist
Scrapkit of choice
(I'm using Dazzling December FTU Scrapkit by Kirsty's Scraps)
Mask of choice (I'm using one by Becky)
Font of choice (I'm using Rage)


Open template, hide credits, shift d to duplicate, close original.

New Raster layer, flood fill white, move to the bottom.

New Raster layer, select with magic wand, copy & paste Paper5 into selection, select none, apply mask, duplicate.

Select BlkOval with magic wand, copy & paste Paper6 as a new layer, resize 75%, selections,invert,delete,select none, hide original.

Copy & Paste bling1 as a new layer, resize 75%.

Select GreOvalFrame with magic wand, new raster layer, flood fill with a color that compliments your tube, select none, add some noise, hide original.

Select WhiteOval with magic wand, copy & paste Paper2 as a new layer, resize 75%, selections,invert,delete,select none, hide original.

Select BlkOvalFrame with magic wand repeat same step as GreOvalFrame changing the color to darker.

Select blacksquare with magic wand,copy & paste image as a new layer, resize to your liking,selections,invert,delete,select none,hide original.

Select SquareGreyFrame with magic wand, new raster layer, flood fill with a color to match the scrapkit, select none, add some noise, hide original.

On each of the Strip layers, select with magic wand, copy & paste paper of choice as a new layer, selections,invert,delete,select none, hide original. Repeat on the next layer changing the paper.

Select blackcircle layer with magic wand, copy & paste Paper1 as a new layer, selections,invert,delete,select none, recolor to match tube, hide original.

Select DarkGreyCircle layer with magic wand, copy & paste Paper9 as a new layer, resize 65%, selections,invert,delete,select none, hide original.

Repeat on LightGreyCircle layer, using the image instead of paper.

Now using your Preset Shape Tool, draw an eclipse (width 2, Foreground matching color, background null) place around each of the circle layers.

Copy & Paste tube of choice as a new layer, resize if needed, place in the middle, add a subtle drop shadow.

Copy & Paste Leaves 2 as a new layer, add drop shadow, place to the right.

Copy & Paste charm1 as a new layer, image,flip, resize 75%, place ontop of the circle image layer, add drop shadow.

Copy & Paste Jewellery2 as a new layer, resize 50%, add drop shadow, place to the left.

Copy & Paste 2 flowers of choice as a new layer, resize to your liking, add drop shadow and arrange to your liking below the leave layer.

Add any other accessories you might like. Resize or crop down canvas,

Add copyright info and any text and you're done. You are now ready to save.
TOD





Friday, January 1, 2010

Love To Rock


Love to Rock

This tutorial was written by Jenny on 01-01-2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Kenny Kiernan. You need a license to use his artwork. I am licensed through Artistic Minds Inc.
Please check his site above for more licensing info.

Supplies Needed:
2 tubes from the same artist
Scrapkit of choice (I'm using FTU Stina by Soxsational Scraps)
-ElegantlyWasted002-Cin Template by Cin at Elegantly Wasted
Font of choice (I'm using Howser)

Open template, hide credits, shift d to duplicate, close original.

Copy & Paste doodle 1 as a new layer, place above mask layer and bring down a little.

Copy & Paste bling2 as a new layer, add drop shadow.

Copy & Paste doodle 2 as a new layer, keeping it over toward the left a bit, add drop shadow.

Select layer 8 with magic wand, copy & paste Paper10 as a new layer, resize 75%, selections,invert,delete,select none, hide original.

Select layer 7 with magic wand, copy & paste Paper3 as a new layer, resize 65%, selections,invert,delete,select none, hide original.

Select layer 6 with magic wand, copy & paste Paper4 as a new layer, selections,invert,delete,select none, hide original.

Select layer 5 with magic wand, copy & paste Paper8 as a new layer, resize 50%, selections,invert,delete,select none,hide original.

Hide music note

Select layer 4 with magic wand,copy & paste Paper1 as a new layer, copy & paste tube of choice as a new layer, selections,invert,delete on paper layer, delete on tube layer, select none, drop the opacity on the tube layer to around 65.

Copy & Paste frame1 as a new layer, resize to your liking, place below the above layers, add drop shadow.

Select layer 3 with magic wand, copy & paste Paper12 as a new layer, resize 50%, selections,invert,delete,select none, hide original.

Copy & Paste heart weed as a new layer, resize to your liking, add drop shadow, place to the left.

Copy & Paste bling doodle as a new layer, see my tag for placement, add drop shadow.

On the word art layers selections, select all, float, defloat, modify, expand 2, new raster layer, flood fill with color of choice, move below each, select none, add drop shadow.

Copy & Paste tube as a new layer, resize if needed, place to the left, add drop shadow.

Copy & Paste rose1 as a new layer, resize to your liking, free rotate 90 degrees right, add drop shadow, see my tag for placement, duplicate, resize 85%.

Add any other accents you would like. Resize canvas or crop to your liking. Add copyright info and text and you're ready to save.
TOD

A Brand New Day


A Brand New Day

This tutorial was written by Jenny on 01-01-2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Josephine Tan. You need a license to use this artwork. I am licensed through Artistic Minds Inc.
Please check her site for new licensing information.

Supplies Needed:
1 Tube and image of choice from same artist
Scrapkit of choice (I'm using A New Beginning by Sophsticat Simone)
WSL_Mask84 by Weescotslass
Font of choice (I'm using jailbIrD jenNA)

Open a new canvas 600 x 600 flood fill white.

New raster layer, select with magic wand,copy & paste Paper3 into selection, select none, apply mask.

Copy & Paste element34 as a new layer, resize 50%, add drop shadow.

Copy & Paste image as a new layer, move below frame, resize if needed, click inside frame with magic wand, modify, expand 4, selections,invert,delete on image layer, select none, drop opacity on image to around 70.

Copy & Paste tube, resize if needed, place to the right of the frame, add drop shadow.

Copy & Paste cross of choice as a new layer, resize 50% times 3, place to your liking, add drop shadow.

Copy & Paste element 10 (hanging stars) as a new layer, place below frame, add drop shadow.

Copy & Paste balloon of choice as a new layer, resize 75%, add drop shadow, mirror so that it's on the left side of the frame.

Copy & Paste another balloon of choice, resize 75%, add drop shadow, place above the other balloon.

Copy & Paste element 37b as a new layer, resize 50% twice, add drop shadow, place at the top middle of the frame.

Copy & Paste New Year hat as a new layer, resize 50%, add drop shadow, place at the bottom left of the frame.

Copy & Paste element 71 (flower arrangement) as a new layer, resize 75%, add drop shadow, place below hat.

Copy & Paste clock, resize 50%, add drop shadow, place below hat.

Copy & Paste Happy New Year wordart as a new layer, resize 85%, place toward the bottom of the canvas.

Crop or resize canvas, add copyright info and any text you'd like, now you are ready to save.
TOD

Time For A Change


Time for a Change

This tutorial was written by Jenny on 01-01-2010. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Ismael Rac. You need a license to use his artwork. I am licensed through Artistic Minds Inc.
You can now purchase his tubes HERE.

Supplies Needed:
1 tube of choice
Scrapkit of choice (I'm using A New Beginning by Bits N Bobs)
Mask of choice (I'm using one by Becky)
Font of choice (I'm using Cafe Rojo and Eight Fifteen)

Open a new canvas 600 x 600 and flood fill white.

New raster layer, select with magic wand, copy & paste paper7 into selection, select none, apply mask.

Copy & Paste frame6 as a new layer, add a subtle drop shadow.

Copy & Paste tube as a new layer, resize if needed, place below frame, use your selection tool to select any of the tube you want sticking out from the frame, right click, promotion selection to layer, move to the top, select none. Then use the selection tool to trace around the bottom of the wire then hit delete on the tube layer to remove any excess sticking out from the frame.

Copy & Paste balloon of choice as a new layer, resize 65%, place in the top right corner of the frame, add drop shadow.

Copy & Paste element 1 (black bow with watch) as a new layer, resize 65%, place above bow that is already on the frame but below your promoted layer, add drop shadow.

Copy & Paste element 31 as a new layer, add drop shadow, place to your liking.

Copy & Paste element 40 (musical notes) as a new layer, resize 65%, add drop shadow, place toward the bottom of the frame.

Copy & Paste element 57 (mask) as a new layer, resize 50%, add drop shadow, place toward bottom right of the frame, free rotate 15 degrees right.

Copy & Paste element 52 as a new layer, place below frame upper right, add drop shadow.

Copy & Paste Paper5 as a new layer, resize 50%, place above mask layer, free rotate 15 degrees left.

Now you are ready to resize the canvas if you'd like. Add copyright info and text and you are ready to save.
TOD