Saturday, February 28, 2009

Kiss Me



Kiss Me

This tutorial was written by Jenny on 2-28-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Geeta Maraj. You need to purchase a license from UpYourArt to use this artwork.

Supplies Needed:
1 Tube of choice (The one I'm using is by Geeta Maraj and can be purchased at UpYourArt)
Wearin The Green PTU Scrapkit by Just A Girl's Designs
Font of choice (I'm using DT St Patty)
Mask of choice (Of course I'm using my favorite from Weescotslass)


Open a new canvas 600 x 600 (we'll resize later). Flood fill white.
Using a paper of choice, apply mask layer.
Copy and paste frame2 as a new layer,resize, add a subtle drop shadow.
Copy and paste paper of choice,resize,using selection tool remove an excess paper from the below the frame.

Copy and paste flower deco as a new layer,resize and move to the left side above the frame,add drop shadow,image,duplicate,image,mirror.

Copy and paste leaves as a new layer,resize,add drop shadow, move below flower deco layer on the left of the frame, duplicate,image,mirror.

Copy and paste charm,resize,add drop shadow, place above frame and at the top right corner of the frame,free rotate around 10 degrees.

Copy and paste bow of choice,resize, add drop shadow and place above charm,image,mirror.

Copy and paste pot of gold as a new layer,resize,add drop shadow,move below flower deco layer but above leaves layer. See my tag.

Copy and paste rainbow as a new layer, add drop shadow,move below frame layer but above paper layer,use selection tool to get rid of any excess rainbow sticking out from the frame.

Now for the tube.. Copy and paste tube of choice and place to your liking. If you are using a similar tube,here's what I did:
Copy and paste tube,move below rainbow layer,using selection tool I took off any excess that I didn't need. Using the selection tool, I selected the part I wanted above the flower deco, right click, promote selection to layer,move the selection above all other layers,select none.

Then I did the same thing to the flower deco only selecting the parts that needed to be brought above the tube.

You can leave those steps out and just add your tube if you wish.
Copy and paste twill tag of choice,resize,add drop shadow and place to your liking, since part of this tube came with the hair sort of chopped off, I used the twill tag to cover that part.

Merge visible, resize by 85% if you want.
Add copyright info.
Add your text and you are done.With mine I used a stroke width of 1.5, converted to raster layer,selections,select all,float,defloat,modify,3, add a new layer, flood fill with a matching color,select none,add drop shadow.


I'd love to see your results.
TOD

Thursday, February 26, 2009

Blue Love




Blue Love

This tutorial was written by Jenny on 2-26-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Amanda Fontaine. You need a license in order to use her artwork. I have a license through Artistic Minds Inc. You can now purchase her tubes HERE.

Supplies Needed:
2 Tubes of choice
You Make My Heart Blue FTU Scrapkit by Bluedream Designs
Font of choice (I'm using Glider Girls)


Open a new canvas 500 x 500. Flood fill white.
Copy and paste paper of choice as a new layer,resize by 75%, add drop shadow.
Copy and paste another paper of choice,resize by 75% and then again by 90%, add drop shadow,free rotate 9 degrees right.
Copy and paste another paper of choice as a new layer, follow the above steps except change the rotate to the left.

Copy and paste bling heart as a new layer, resize if needed, add drop shadow, free rotate 9 degrees to the right, move to the right of the canvas.

Copy and paste flower of choice, resize if needed, add drop shadow, move to the top left of the canvas.

Copy and paste frame of choice, resize if needed, place in the center of your canvas.
Copy and paste paper of choice as a new layer and place below frame layer, remove any excess.

Copy and paste tube of choice as a new layer, move below frame but above paper layer,add drop shadow, drop the opacity down to around 50.
Copy and paste ribbon of choice as a new layer,below frame but above tube layer.

Copy and paste bling of choice as a new layer, move to the left of the canvas, above frame, add drop shadow.

Copy and paste tube of choice as a new layer, resize if needed, add drop shadow, move to the left side of the canvas above the bling layer.

If you can use the same tube that you dropped the opacity on then copy and paste it again, resize if needed, add drop shadow and place to the right of the canvas toward the bottom.

Copy and paste flower and spiral hearts as a new layer, mix together and place above frame layer keeping it behind any outside frame tube layers, add drop shadows.

Add copyright info,merge visible, add text and you're done.

Thanks for trying my tutorial.
TOD

My Outdoor Friends



My Outdoor Friends

This tutorial was written by Jenny on 2-26-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Amanda Fontaine. You need a license to use her artwork. I have a license through Artistic Minds Inc. Please visit her site for future licensing info.
You can also see below another example of this tut using artwork by Lacy Clagg.



Supplies Needed:
Tube of Choice (The one I'm using is by Amanda Fontaine, package 19 at AMI)
Spring-A-licious FTU Scrapkit by Cinnamon Scraps
Font of choice (I'm using Pea Mary Katie)

Open a new canvas 550 x 550 (resize later). Flood fill white.
Copy and paste paper of choice as a new layer, resize by 65%, add drop shadow.
Copy and paste another paper of choice as a new layer, resize by 65%, then again by 88%, free rotate 12 degrees right.
Copy and paste another paper of choice as a new layer, follow the above steps except change the rotate to the left.

Copy and paste doodle as a new layer,resize 90%, add drop shadow.
Copy and paste frame of choice as a new layer, resize, add drop shadow.
Copy and paste paper of choice, move below frame, using selection tool, cut off excess paper.
Copy and paste tree as a new layer, resize,move below frame layer, you can then use your selection tool to bring the top part of the tree above the frame by selecting the part you want, right clicking, promote selection to layer and move it above all otheres. Then add drop shadow to the original layer.

Copy and paste flower of choice, resize and move below frame, toward top right corner of canvas.
Copy and paste butterflies as a new layer, resize, add drop shadow and place to your liking.

Copy and paste grass as a new layer, resize and move below your tree layer.
Copy and paste the snake as a new layer,resize, add drop shadow, place above frame, in front of tree.

Copy and paste Tube of choice,resize if needed, add drop shadow, move to the right side of the frame.

Resize if you'd like or crop down a bit.

Add copyright info, Merge Visible, add text and you're done.





Below is a similar tag I made using the same kit and artwork by Lacy Clagg. You need a license to use her artwork. I am licensed through LCTS for these images. You can now purchase her tubes at Creative Design Outlet.

TOD

Vintage Ballerina



Vintage Ballerina

This tutorial was written by Jenny on 2-26-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Shawn Palek. You need to purchase a license from UpYourArt to use this artwork.

Supplies Needed:
Tube of choice (I'm using one by Shawn Palek check out UpYourArt for licensing info)
Vintage Floral PTU Scrapkit by Baby Cakes Scraps (awesome kit)
Mask of choice (I'm using my favorite by Weescotslass)
Font of choice (I'm using 1 BeanSprout DNA)

Open a new canvas 600 x 600 (you can resize later). Flood fill white.
Using a paper of choice apply the mask you want to use.
Copy and paste Stamp Frame as a new layer, add drop shadow.
Copy and paste doodle twon as a new layer, add drop shadow and move below the frame.
Copy and paste branch as a new layer, resize by 50% and then again by 85%, add drop shadow,move layer above frame, place so it is laying across the bottom part of the frame.
Now you want to duplicate the branch, free rotate 90 degrees, place in the middle of the tear of the frame, duplicate,image, mirror.
Copy and paste jewls of choice,resize if needed and place to your liking, add drop shadow.
Copy and paste flower of choice, resize if needed, add drop shadow and place above the branch layers that you rotated, move toward the bottom.
Copy and paste charm of choice as a new layer, resize if needed, rotate 5 degrees to the right, add drop shadow and place next to the flower layer.
Now for your tube layer....
Copy and paste tube of choice as a new layer, move below frame layer. You can keep the tube inside the frame or have it like mine by using your selection tool to select the parts you want above the frame, right click on the layer, promote selection to layer, move above all other layers. Add drop shadow to the original tube layer. If your tube doesn't fit the entire frame like mine does then you may want to add a paper behind it.
Copy and paste bow ribbon of choice as a new layer, place below the frame layer but above your tube layer and see my tag for placement. Resize if needed, add drop shadow.
Merge visible, add copyright info, text and you're done.

Hope you enjoyed my tutorial. I'd love to see your results.
TOD

Monday, February 23, 2009

Heaven's Child



Heaven's Child
This tutorial was written by Jenny on 2-23-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Rachael Tallmay. You must have a license to use her artwork. You can visit her site HERE.

Supplies Needed:
Tube of choice
Simply Heaven PTU Scrapkit by Just A Girl's Designs
Mask of choice
Font of choice (I'm using Pea Alesa)


Open a new canvas 550 x 550. Flood fill white.
Use a paper of choice and apply mask layer as usual.

Copy and paste a couple of the clouds and arrange to your liking.

Copy and paste the rain as a new layer, resize,add drop shadow and move toward the top of your mask.

Copy and paste Heavenly gate as a new layer, resize,duplicate,image,mirror,pull them apart just a bit more. See my tag for placement.

Copy and paste cloud as a new layer and move below gate.

Copy and paste flowers as a new layer, you can use the flowers or combine several together like I have, resize,add drop shadow and place accordingly. See my tag.

Copy and paste bows of choice,resize,add drop shadow and place above flowers.
Close all layers except the flowers and the bow, merge visable. Unhide the other layers. With the flower layer selected, duplicate,image, mirror.

Copy and paste hearts, resize add drop shadow and place to the lower left of the canvas. I resized one smaller than the other and free rotated it just a bit to the left.

Copy and paste another cloud, keeping it on the outside of the gate, resize,place to the right of the canvas.

Copy and paste harp, resize,add drop shadow,image,free rotate 5 degrees right.

Copy and paste open book as a new layer,resize,add drop shadow,place above harp and to the right of the canvas.

You can then adorn your book with the feather pen and a cross if you'd like.

Copy and paste tube of choice as a new layer, resize if needed, add drop shadow, move below the cloud layer that is below the gate (you should have gate,cloud under,tube under,cloud,rain,mask) pull the tube upward so that it looks as though it's coming out of the clouds.

Now is the time to resize or crop if you wish.

Add copyright info, add your text, merge visable, you're done.
When I added my text I did so with the feather pen on top of it so it looks as though it was just wrote with the feather pen.
TOD

Friday, February 20, 2009

Shamrock Land



Shamrock Land

This tutorial was written by Jenny on 2-20-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Amanda Fontaine. You need a license to use here artwork. I have a license through Artistic Minds Inc. You can now purchase her tubes HERE.

Supplies Needed:
2 Tubes of choice
Irish Charm FTU Scrapkit by Bluedream Designs
Mask of choice (I'm using one by Becky)
Font of choice (I'm using Susie's Hand)

Open a new canvas 550 x 550. Flood fill white.
Using your choice of paper from the kit, apply mask layer.

Copy and Paste frame 4 as a new layer, resize by 65%, add drop shadow.

Copy and paste paper of choice as a new layer. Using the magic wand, click inside the frame,selections,modify,7,selections,invert,while on the paper layer hit delete on your keyboard,Keep selected and copy and paste close up tube as a new layer, resize if needed, hit delete again,selections,select none, make sure paper layer is below frame and tube layer is above paper, add drop shadow to tube.

On the tube layer drop the opacity to around 60%.

Copy and paste button of choice,resize to 50% 2x's,add drop shadow.
Copy and paste another button of choice,resize to 50% 2 x's and again by 75%, place to your liking or see my tag for placement.

Copy and paste Large Bow of choice,resize,add drop shadow, move to the right side of the frame.

Copy and paste hat of choice,resize,add drop shadow and move to the left of the frame.

Copy and paste tube as a new layer, keeping above the hat layer,resize if needed,add drop shadow.

Copy and paste bling shamrock as a new layer,add drop shadow, move below paper layer but above mask layer keeping it so that the shamrock is sticking out from the frame (see my tag),duplicate,mirror.

Copy and paste flower of choice,add drop shadow, resize if needed, place below bling shamrock layer, duplicate,image,mirror,flip.

Merge visable.

Add copyright info.

Add Text and you're done.
TOD

Thursday, February 19, 2009

Spring Time



Spring Time

This tutorial was written by Jenny on 2-19-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Popeye Wong.

Supplies Needed:
Popeye Wong's Natural Beauty Tube
Spring Time Bears FTU Scrapkit by Soxsational Scraps
Font of choice (I'm using Digs My Hart)

Open a new canvas 600 x 600. Flood fill white. If you want to resize you can do that at the end.
Copy and paste paper 10 as a new layer, resize by 75%, add a slight drop shadow.
Copy and paste paper 12 as a new layer, resize by 75% and then again by 90%, free rotate about 15 degrees to the right, add drop shadow.
Copy and paste fence as a new layer, position upward the middle of your canvas, above the paper layers, add drop shadow.
Copy and paste tree as a new layer, add drop shadow and move above the fence layer. See my tag for placement.
Copy and paste cart as a new layer, resize if needed, add drop shadow and move to the bottom righ corner,keeping it above all other layers.
Copy and Paste Popeye Wong Natural Beauty Tube as a new layer, resize if needed, add drop shadow. See my tag for placement.
Copy and paste butterflies and bee as a new layer, resize,add drop shadow and position them to your liking. Merge visable.
Add copyright info and your text and you're done.

I'd love to see your results.
TOD

Tuesday, February 17, 2009

Triple Award

Photobucket

I received this award from Sherry's Scrappy Things. Thanks so much Sherry.

Rules for this award:
1. Must pass it on to atleast 10 other bloggers.
2. Link back to the blogger who gave you the award.
3. Link to the bloggers you award it to.


My List:
hmm this will take some thought. I'll post them asap.
Ok I've thought it through and here is my list:

1. Natasha
2. Yolanda
3. Lacy Clagg
4. Clutz Creations
5. Digital Embellishments
6. JadeMonkey Photography
7. Just A Girl's Designs
8. Kimberly's Creations
9. Mz. Peg's Corner
10. RyLee's This & That

Friday, February 13, 2009

Friends are Forever



Friends are Forever

This tutorial was written by Jenny on 2-13-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the Artwork of Amanda Fontaine. You must have a license to use her artwork. I have a license through Artistic Minds Inc. You can now purchase her tubes HERE.

Supplies Needed:
2 tubes of choice
Scrapkit of choice (I'm using Love or Lust by Bluedream Designs)
Mask of choice (I'm using my favorite one from Weescotslass)
Font of choice (I'm using SBC Well Said)

dsb flux bright noise (optional)
MuRa's Meister Copies (optional)

Open a new canvas 500 x 500. Flood fill white.
Apply mask layer.
Copy and paste Love or Lust Ornament as a new layer, resize, add drop shadow. I applied dsb flux bright noise to some of them but I didn't actually animate them. You can leave that step out if you want.
Copy and paste book frame as a new layer,resize,add drop shadow.
Copy and paste paper of choice as a new layer, place below frame, use selection tool to get rid of the excess paper.
Copy and paste tube of choice as a new layer, resize if needed, add drop shadow, see my tag for placement below the frame.
I used MuRa's Meister Copies and typed out "Friends are Forever" using default settings. You can do that or just duplicate your text layer and move it down a few times. Keep your text below the tube layer.
Copy and paste flower of choice as a new layer,resize,add drop shadow and place to the right of the book frame.
Copy and paste tube of choice as a new layer,resize,add drop shadow, I placed mine so that it looks as though it's sitting on the flower.
Add copyright info, text,merge visable and you're done.
TOD

Love Always



Love Always

This tutorial was written by Jenny on 2-13-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Lacy Clagg. You need a license to use her artwork. I am licensed to this image through LCTS. You can now purchase her tubes at Creative Design Outlet.

Supplies Needed:
1 Tube or image of choice (I am using Twilight by Lacy Clagg)
A Hint of Red PTU Scrapkit by Baby Cakes Scraps
(I love this kit! It can be used for so many different things, not just Valentine's Day)
Mask of choice (I am using one Weescotslass WSL_Mask86)
Font of choice (I am using Turtle Club)

Mura's Meister Copies Plugin

Open a new canvas 600 x 600 (we will crop it later). Flood Fill white.
Use a paper from the kit and apply the mask as usual.
Copy and paste frame of choice as a new layer,resize, add drop shadow.
Copy and paste a paper of choice or your image, move below frame layer,resize if needed, use selection tool to get rid of excess.
If you're using a tube then apply a drop shadow to it as well.
Copy and paste Love Always word art, add drop shadow and move to the top of the frame.
Copy and paste flower of choice,resize,add drop shadow and move to the bottom left of your frame.
Copy and paste red heart, resize if needed, add drop shadow and place above your flower image.
Copy and paste wire bead, add drop shadow and place above red heart.
Copy and paste black diamond as a new layer, resize, add drop shadow and place in the center of your canvas.
Effects,plugins,MuRa's Meister, Copies,Encircle ( my settings to the right are 12,50,50,0,100,-25,100,0,100,0,0)
Move below frame and paper layer and toward the top left of your frame, duplicate,mirror,flip.
Merge visable. Add copyright info and text now you can crop your tag if you want and you're done.
Hope you enjoyed this tutorial.
TOD



Thursday, February 12, 2009

Irish Blessings




Irish Blessings

This tutorial was written by Jenny on 2-12-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Lacy Clagg. You need a license to use her artwork. I am licensed to this image through LCTS. You can now purchase her tubes at Creative Design Outlet.

Supplies Needed:
1 tube of choice (I am using clover by Lacy Clagg)
Scrapkit of choice
(I am using a FTU Scrap by Beth Turner however, this scrapkit is no longer available on her site)
Shamrocks and cloud by Rainbow Coffi
Mask of choice (I am using one by Weescotslass)
Font of choice (I am using A&S Graceland)
dsb flux bright noise (optional)

Open a new canvas 550 x550. Flood fill white.
Using a paper of choice from the kit, apply your mask layer.
Copy and paste cloud as a new layer, resize around 95 %, add a subtle drop shadow, move toward bottom of your canvas, duplicate,image,mirror,move up just a bit, duplicate that layer and move toward the top of your canvas.
Copy and paste pot of gold as a new layer, add drop shadow,image,mirror and see my tag for placement.
Copy and paste tube as a new layer,resize if needed,add drop shadow,move to the right of your canvas, place upon the clouds.
Copy and paste shamrocks as a new layer,resize,add drop shadow and place above all layers.
Add copyright info, add text, merge visable and you're done.

I used the magic wand and selected inside each letter of my text and applied dsb flux bright noise 25. This is just optional :)
TOD

Monday, February 9, 2009

Sweet Dreams

Sweet Dreams

This tutorial was written by Jenny on 2-9-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Amanda Fontaine. You will need to purchase a license to use her artwork. I have a license to use this tube through Artistic Minds Inc. You can now purchase her tubes HERE.

Supplies Needed:
Tube of choice
Good Night Moon PTU Scrapkit by Just A Girl's Designs
Font of choice (I'm using one His Name is Honey)

Open new canvas 500 x 500. Flood fill white.
Copy and paste flower 9 and flower 10 as a new layer, add a drop shadow to each,resize each and space them apart a bit, duplicate each one and mirror them, duplicate again both flowers and flip them, duplicate again and mirror.See my tag for details.
Copy and past cloud as a new layer and place toward the top of the flowers.
Copy and past frame of choice,resize,add drop shadow. Copy and paste paper of choice and place below frame layer, use selection tool to get rid of excess paper.
Copy and past flowers of choice, resize,add drop shadow, place one top left below paper layer and one lower bottom right below paper.
Duplicate cloud and move the duplicate layer above the paper layer.
Copy and paste sweet dreams wordart as a new layer,resize,add drop shadow and move toward the top of the frame.
Copy and paste baby sheep2 as a new layer,resize,add drop shadow,place to your liking.
Copy and paste mushroom and resize, add drop shadow and place to your liking.
Copy and past tube of choice as a new layer, resize if needed, add drop shadow, move toward bottom right corner of frame.
Add copyright info and text. you're done. thanks for trying my tut.
TOD

Deep Sympathy




Deep Sympathy

Animation isn't visable due to resizing to fit the post.

This tutorial was written by Jenny on 2-9-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using the artwork of Lacy Clagg. You need a license to use her artwork. I am licensed to this image through LCTS. You can now purchase her tubes at Creative Design Outlet.

This tutorial is dedicated to the memory of Caylee Anthony.

Supplies Needed:
1 Tube of choice (Or the one I'm using Angelbaby by Lacy Clagg)
Mask of choice (I'm using one by Vix)
Good Night Moon PTU Scrapkit by Just A Girl's Designs
2 Fonts of choice (I'm using Courtney Dorkling and Redhead)

Alien Skin Xenofex 2 Constellation (optional)
dsb flux bright noise (optional)
Animation shop (optional)

Open a new canvas 600 x 600 (you can resize later). Flood fill white.
New raster layer,select all.
Copy and paste JAG Good Night bkg2 into selection,select none.
Apply mask.
Copy and paste tube of choice, resize, add drop shadow, move to the left of your canvas.
Copy and paste sparkle 1 as a new layer,resize, move to the right of your canvas and up a bit.
Copy and paste cloud as a new layer,keep above your tube layer and down toward the bottom of your canvas.
Copy and paste bird as a new layer, resize, move to the right corner of the cloud.
Copy and paste flowers,resize,add drop shadow. I used both colors that came with the kit, duplicated each one and rotated a couple of them just a bit.
Move all layers below the cloud but above the tube layer and to the right of the cloud. See my tag for placement.
Copy and paste bow of choice as a new layer,resize,add drop shadow, place above cloud layer and on top of the flowers. See tag for placement.

If you don't want to animate then you can merge visable, add copyright info and text and you're done. Or read below for animation directions.

Add your text above the cloud. On the word Sympathy I used redhead font,stroke width 2.0 then I used the magic wand to select inside each letter and then added the bright noise. I did not animate this. Selections,select none. I used Courtney Dorkling for the words With Deepest, stroke width the same.

Add copyright info. Open animation shop.

Back in PSP, select the mask layer, effects, plugins,alien skin xenofex 2, Contellation with these settings:

Star Size: 4.00
Size Variation: 22
Edge Star Density: 15
Overall Star Density: 0
Overdrive: 100
Twinkle Amount: 75
Twinkle Rotation: 45
Keep original image
Random seed: 6387

Settings are approx. so please feel free to play around with them till you get the desired effect you want.

Copy merged, paste as a new animation in animation shop.

Back to PSP, undo then redo the effect pressing the Random Seed once.

Copy merged,paste after animation in animation shop.

Back to PSP, undo then redo the effect pressing the Random Seed again.

Copy merged,paste after animation in animation shop.



I resized mine by 85%.

Save as a gif. You're done:) thanks for trying my tut.
TOD

Sweet Water

Photobucket

Sweet Water

This tutorial was written by Jenny on 2-9-2009. Resemblance to any other tutorial is purely coincidental and unintentional. I am using my own photography, JennyZ DreamZ, if you're interested in licensing my photography for sig tag usage please contact me at the email address to the right. This image was also available at LCTS when it was open.

Supplies Needed:
1 photo of choice
Beary Sweet PTU Scrapkit by Baby Cakes Scraps
Mask of choice (I am using on by Weescotslass)
Font of choice (I am using Eight Fifteen)

Open a new canvas 600 x 600 (you can resize later). Flood fill white.

There's going to be a lot of copying and pasting...nothing special :)

New raster layer,select all,copy paper of choice and paste into selection,select none,apply the mask.
Copy and paste another paper of choice as a new layer,resize to your liking,add drop shadow.
Copy and paste another paper of choice as a new layer,resize to your liking,add drop shadow,image,free rotate right 8 degrees.
Copy and paste doodle of choice,resize,add drop shadow, place above 2nd paper layer and to the right of your canvas, duplicate,mirror,flip.
Copy and paste bcs charm frame (or frame of choice) as a new layer,resize, add drop shadow.
Copy and paste photo of choice as a new layer, move below frame layer,resize if needed, using your selection tool remove any excess. Using the change to target brush, recolor the photo to match the scrap you are using. Merge frame and photo layers together.
Copy and paste flowers of choice, move below framed photo layer, resize,add drop shadow and place around to your liking.
Copy and paste bcs heart charm of choice,resize,add drop shadow, move to top left of the frame.
Copy and paste another doodle of choice,resize,add drop shadow, see my tag for placement.
Copy and paste another bcs heart charm of choice as a new layer,resize,add drop shadow, move above the previous heart,free rotate 4 degrees right.
Copy and paste bow of choice,resize,add drop shadow, place above heart charms.
See my tag for more details.
Add copyright info, text and save.
Thanks for trying my tutorial.
TOD